Copper Washers FA1D56-03-21

Short Description:

The copper washer FA1D56-03-21 is a high-performance sealing element widely used in industrial equipment such as booster pumps. The Washer is made of high-purity copper material and has good electrical conductivity, thermal conductivity, corrosion resistance and mechanical strength. Its main function is to ensure that the fluid in the pump body does not leak into the external environment, while protecting the cleanliness of the pump and preventing impurities from entering the pump body, thereby ensuring the normal operation of the pump.
Brand: YOYIK

Send email to us

Product Detail

Performance characteristics

1. Good electrical conductivity and thermal conductivity: Copper is an excellent conductive material, and its electrical conductivity is second only to silver. It is suitable for application scenarios that require good electrical conductivity. Excellent thermal conductivity, can quickly dissipate heat, and is often used in heat transfer components in high temperature environments.

2. High strength and good ductility: Copper has high tensile strength and good ductility, is easy to process and shape, and can withstand high mechanical stress. It can still maintain high strength and toughness in high temperature environments.

3. Excellent corrosion resistance: Copper has good corrosion resistance and can resist corrosion from the atmosphere, water, and certain chemical media, but it will be corroded by media such as ammonia, ammonia salts, and wet hydrogen sulfide. In some media, a dense oxide film will form on the surface of copper, further improving its corrosion resistance.

4. Easy processing: Copper is easy to cut, forge, roll, and weld, and can be made into complex shapes and sizes through various processing techniques.

Technical parameters

- Model: FA1D56-03-21

- Material: Copper

- Applicable media: non-corrosive media such as water, oil, and gas

- Operating temperature range: -20℃ to +180℃

- Working pressure: 1.6MPa

- Sealing performance: excellent, can effectively prevent medium leakage

Application

- Pre-pump: In the pre-pump, the copper washer FA1D56-03-21 is used to ensure that the fluid in the pump body will not leak, protect the cleanliness of the pump, and prevent impurities from entering the pump body, thereby ensuring the normal operation of the pump.

- Mechanical equipment: Commonly used in bearing support, gear transmission and other parts in mechanical equipment, it plays a role in sealing and bearing.

Installation and maintenance

1. Installation points:

- When installing the copper washer FA1D56-03-21, it is necessary to ensure that the flow direction of the Washer is consistent with the flow direction marked in the pipeline to avoid backflow caused by installation errors. At the same time, the sealing of the Washer and the pipeline connection should be ensured to prevent medium leakage.

- Before installation, the surface of the equipment should be clean and free of impurities and contaminants to ensure the sealing effect.

2. Maintenance suggestions:

- Regularly check the sealing performance and operating flexibility of the Washer to detect and deal with potential problems in time.

- During maintenance, pay attention to the protection of key components such as Washers to avoid damage caused by improper operation.

- Regularly replace Washers to ensure the sealing and reliability of the system.