EH oil-return filter DL006001

Short Description:

The EH oil-return filter DL006001 is a pressurized return oil filter element mainly used for filtering the inlet of the EH oil main pump to ensure effective filtration of oil when entering the pump body and protect the normal operation of the oil pump. The cleaning work of the EH oil system is very important, especially during the construction or maintenance of new units, attention should be paid to maintaining a clean working environment. The maintenance of the fire resistant oil system mainly relies on various filter elements, which should be replaced regularly and regularly. As a pressurized return oil filter element, it bears a lot of pressure.
Brand: YOYIK

Send email to us

Product Detail

Performance characteristics

1. The new filtering material of the EH oil-return filter DL006001, with a multi-layer filtering structure, ensures high dirt content and separation ability, with a uniform texture, corrosion resistance, and fatigue resistance.

2. Innovative vertical bonding technology, perfectly bonded filter material ends, especially under different load changes, can effectively prevent suspended particles from entering the filtration zone from the dirt area.

During the operation of EH oil-return filter DL006001, static electricity can be exported below the safe value, indicating that continuous black carbon formation or oil accumulation related to sudden electric shock can be eliminated.

4. The aperture of the EH oil-return filter DL006001 is uniform, with low resistance, large dust capacity, and a large effective filtration area.

5. Oil and temperature resistant epoxy resin adhesive is bonded and sealed firmly.

6. Thickened steel plate framework with strong compressive strength.

Installation precautions

When installing the EH oil-return filter DL006001 of the EH main oil pump inlet filter, the following points should be noted:

1. Installation direction: The filter element should be installed in the direction indicated by the marked arrow. The arrow usually points towards the outlet direction of the filter element, which is the direction of the oil flow after passing through the filter element.

2. Pre-treatment: Before installing the EH oil-return filter DL006001, the filter element seat and the inside of the filter body of the EH main oil pump inlet filter should be cleaned first to ensure that there are no impurities and dirt inside the filter element seat and filter body.

3. Installation position: The EH oil-return filter DL006001 should be correctly installed in the filter element seat to ensure good sealing.

4. Lubricating filter element: Before installing the EH oil-return filter DL006001, a certain amount of clean EH lubricating oil should be evenly applied to the surface of the filter element to enhance its sealing and filtering effect.

5. Tightening nut: After the installation of the EH oil-return filter DL006001, a suitable wrench should be used to tighten the nut of the EH main oil pump inlet filter, but not too tight to avoid deformation or damage to the filter element.