Technical parameters
1. Filtration accuracy: 118 mesh, which can effectively filter out solid particles and impurities in the medium.
2. Operating parameters:
- PH value: 1~13
- Working temperature: general type <60℃ (ΔP:0.03Mpa), high temperature type <90℃ (ΔP:0.02Mpa)
- Maximum pressure difference (60℃): 0.01Mpa forward/0.06Mpa reverse
3. Filter material: Made of polypropylene, stainless steel, glass fiber and other materials, it has good chemical compatibility and corrosion resistance.
Performance characteristics
1. High filtration accuracy: The Filter element MZFP-32-118mesh adopts fine filter material, which can effectively filter out solid particles and impurities in the medium and ensure the cleanliness of the medium.
2. Large dirt holding capacity: The filter element is designed as a honeycomb structure with sparse outside and dense inside, with a large dirt holding capacity, and can maintain high-efficiency filtration performance for a long time.
3. High temperature and high pressure resistance: The filter element can work stably under high temperature and high pressure environment, and is suitable for various complex working conditions.
4. Good chemical compatibility: The filter element material has good chemical compatibility and can withstand corrosion from various acid and alkali media.
5. Large flux: The filter element adopts a multi-layer filtration structure, which can provide a large flux and reduce pressure loss.
Application
- Electronic industry: filtration of liquids used for pure water, organic solvents, printed circuit boards, plastic electroplating, metal surface treatment, etc.
- Industrial oil: filtration of various industrial oils such as hydraulic oil, lubricating oil, cutting oil, mechanical precision machining cooling oil, etc.
- Chemical industry: hydrogen peroxide, resin, lubricating oil, polymer, viscose, aviation coal and various oils, catalysts, various fluid purification in the process of chemical fiber manufacturing.
Installation
1. Confirm the filter element model and its required accessories, turn off the corresponding water source or liquid supply, and remove the old filter element.
2. Clean the filter element slot and filter housing to ensure a clean and dust-free installation environment.
3. Gently place the new filter element into the filter element slot, and ensure that an O-ring is placed between the bottom of the filter element and the slot to ensure sealing performance.
4. According to the direction indications on the filter element and the slot, ensure that the filter element is installed in the correct direction and tighten the filter element.
3. Cleaning and maintenance: When replacing the Filter element MZFP-32-118mesh, the filter housing and related components should be cleaned and maintained to remove residual oil and impurities to ensure the cleanliness and smoothness of the filtration system.
Maintenance
1. Regular replacement: According to the impurity content and filtration time of the filtered liquid, it is generally recommended to replace the filter element every 3-6 months. If the filtration effect is found to be significantly reduced, it should also be replaced in time.
2. Regular cleaning: For some reusable filter elements, they should be cleaned regularly to remove impurities attached to the surface. Use warm water when cleaning, and avoid using overheated water or chemical solutions to prevent damage to the filter element material.
3. Keep the environment clean: When replacing or cleaning the filter element, keep the surrounding environment clean to avoid impurities and microorganisms from contaminating the filter element.
4. Regular inspection: Regularly check the working status of the filter element to ensure its normal operation. Check whether the filter housing, support net and pipe parts are intact.
Filter element MZFP-32-118mesh Details
