-
Gas turbine actuator filter DP309EA10V/-W
The gas turbine actuator filter DP309EA10V/-W is a very important filter that can effectively filter out impurities and pollutants in the actuator, protecting the normal operation of the actuator. In a gas turbine actuator, the role of the filter element is crucial. Without the protection of the filter element, the hydraulic actuator is easily damaged and malfunctioned by pollutants.
Brand: YOYIK -
Oil filter coarse filter DR913EA10V/-W
The Oil filter coarse filter DR913EA10V/-W is used for efficient filtration of solid particles in various industries such as metallurgy, power, chemical, and engineering machinery, such as fire-resistant oil, lubricating oil, hydraulic oil, insulation oil, turbine oil, water glycol, etc., to ensure the quality and cleanliness level of the oil.
Brand: YOYIK -
Fire-resistant oil filter DP401EA01V/-F
The Fire-resistant oil filter DP401EA01V/-F is a steam turbine main oil pump inlet flushing filter. Before putting the working filter element into operation, it is necessary to first install the flushing filter element to pre filter the mechanical impurities and colloidal substances in the fire-resistant oil, and then install the working filter element to achieve better filtering effect.
Brand: YOYIK -
Control valve actuator inlet working filter AP3E302-01D10V/-W
The Control valve actuator inlet working filter AP3E302-01D10V/-W is an imported working filter element produced by our company, Deyang Dongfang Yoyik. The hydraulic actuator is an actuator of the turbine speed control system, and the hydraulic actuator is a device that controls the speed control valve by relying on the pressure difference of high-pressure oil.
Brand: YOYIK -
Gas turbine actuator filter DP302EA10V/-W
The gas turbine actuator filter DP302EA10V/-W is a stainless steel welded filter element for gas turbines, also known as the working filter element for hydraulic motors. The filter element DP302EA10V/- W is an all metal material filter element made of stainless steel and welded by argon arc welding.
Brand: YOYIK -
EH oil main pump suction filter HQ25.200.11Z
The EH oil main pump suction filter HQ25.200.11Z is used for filtering the inlet of the fire resistant oil pump in power plants. The filter element is made of multi-layer metal mesh and filter material, and the number of layers and mesh forming the mesh depends on different usage conditions and purposes. It has high concentricity, high pressure resistance, good straightness, stainless steel material, and no burrs. The bypass valve capacity of the filter element is very important. When the filter element is not replaced in a timely manner, the bypass valve can automatically open to ensure the normal operation of the system.
Brand: YOYIK -
lubricating oil filter element 2-5685-0154-99
The lubricating oil filter element 2-5685-0154-99 is a filtering accessory of the turbine system. The function of the lubricating system is to continuously deliver a sufficient amount of clean oil with appropriate temperature to the friction surfaces of all transmission components during engine operation, thereby forming a lubricating oil film. Not only can it effectively alleviate the friction of parts, but it can also reduce power loss, reduce friction, lower temperature, ensure the service life of the engine, and provide a good working state.
Brand: YOYIK -
Regeneration device anion filter AZ3E303-05D01V/-W
The regeneration device anion filter AZ3E303-05D01V/-W of the regeneration device is a resin filter element, which is a porous insoluble exchange material. Good materials determine excellent performance. The filter element has good adsorption of organic matter, which can decolorize, clarify, and transparent the filtered liquid. It can filter particles, impurities, and remove water. The working principle of this filter element is to separate water from oil through ion exchange.
Brand: YOYIK -
Filter for EH oil station DL008001
The Filter for EH oil station DL008001 is our company's advantageous product. The filter element has neat corrugations, a hard internal skeleton, good filtering effect, and a large amount of dirt. It can remove solid particles in the liquid; protect the normal operation of the equipment or the cleanliness of the air. When the fluid enters the filter element with a certain specification of filter screen, its impurities are blocked, and the clean fluid flows out through the filter element.
Brand: YOYIK -
Regeneration oil pump suction filter HQ25.300.12Z
The regeneration oil pump suction filter HQ25.300.12Z is installed at the inlet of the oil suction pump to remove impurities from the oil entering and exiting the system, in order to protect the safe and efficient production of the steam turbine and hydraulic system. The filter element is suitable for medium such as EH fire-resistant oil, lubricating oil, hydraulic oil, etc.
Brand: YOYIK -
EH oil-return filter DL006001
The EH oil-return filter DL006001 is a pressurized return oil filter element mainly used for filtering the inlet of the EH oil main pump to ensure effective filtration of oil when entering the pump body and protect the normal operation of the oil pump. The cleaning work of the EH oil system is very important, especially during the construction or maintenance of new units, attention should be paid to maintaining a clean working environment. The maintenance of the fire resistant oil system mainly relies on various filter elements, which should be replaced regularly and regularly. As a pressurized return oil filter element, it bears a lot of pressure.
Brand: YOYIK -
Hydraulic Oil Cycle Pump Suction Filter WU-63×80-J
The hydraulic Oil Cycle Pump Suction Filter WU-63x80-J of the circulating pump belongs to the mesh gap type coarse filter, which is generally installed at the suction port of the oil pump to protect the oil pump from inhaling large mechanical impurities. The filter has a simple structure, high oil flow capacity, and low resistance, and is connected in a tubular manner.
Brand: YOYIK
/
