The Lubricating oil filter element 21FC5128-160X600/25 is used in the hydraulic system to filter out solid particles and colloidal substances in the working medium, effectively controlling the pollution level of the working medium. This is used for oil absorption filtration to remove solid particles and colloidal substances in the working medium, effectively controlling the pollution level of the working medium. Installed inside the fuel tank and must be installed below the fuel tank level. The filter element is made of stainless steel woven material.
Performance characteristics
The Lubricating oil filter element 21FC5128-160X600/25 mainly has the following performance characteristics:
1. Using multi-layer composite structure filter paper, high filtration accuracy:
2. Large pollution capacity and long service life;
3. High flow density and low pressure loss;
4. The carefully set and specially treated glass fiber layer has good coalescence effect;
5. Working medium: lubricating oil, phosphate ester hydraulic fluid;
Advantage
1. This Lubricating oil filter element 21FC5128-160X600/25 can be directly installed on the top, side or bottom of the oil tank, with the filter head exposed outside the tank and the simplified part immersed in the tank, simplifying the system pipeline and making the system layout more compact.
2. Equipped with a bypass valve: When starting with cold oil, due to factors such as low system liquid temperature and flow pulsation, the main engine cannot work due to excessive pressure difference of the filter, and when the filter element is blocked by pollutants, the bypass valve in parallel at the lower part of the filter cover will automatically open (with an opening pressure difference of 0.4MPa) to ensure the normal operation of the filter element and system.
3. Equipped with a check valve: The filter is placed on the side and bottom of the fuel tank, so that when replacing the Lubricating oil filter element 21FC5128-160X600/25, the oil in the tank will not flow out.
4. Equipped with a combination of visual indication and electrical signal transmission device, overflow pipe, and dirt accumulation cup: When the Lubricating oil filter element 21FC5128-160X600/25 gradually becomes blocked, the blockage of the filter element can be observed on the visual gauge. At the same time, an electrical signal (with a signal value of 0.35MPa) can also be connected. An overflow pipe and dirt accumulation cup are set at the bottom of the filter element, which can be carried out together when replacing the filter element, thus avoiding the phenomenon of pollutants falling back into the oil tank.
Lubricating oil filter element 21FC5128-160X600/25 Show
