The actuator working filter DP3SH302EA10V/W can be installed at the outlet of the main pump in the EH oil system. It is a type of filter element for regulating the security system. The raw material used is non-toxic and odorless polypropylene. The filter element has a deep filtration structure with uniform pore size, sparse outer and dense inner, and has high filtration efficiency. The filtration efficiency is above 98%. It is resistant to corrosion by chemical reagents such as acid and alkali, has high strength, and the filter element is not easily deformed.

The actuator working filter DP3SH302EA10V/W is used for the EH oil system. Its main function is to filter impurities in the EH oil, maintain the cleanliness and smoothness of the EH oil, reduce friction of equipment components, maintain the smooth operation of the hydraulic actuator, and smoothly adjust the air valve to achieve the purpose of controlling the steam inlet of the turbine. The filter element is installed at the inlet of the hydraulic actuator and has strong filtering ability, which can effectively reduce the mixing of impurities, thereby ensuring the stability and reliability of the EH oil system.

The characteristics of the actuator working filter DP3SH302EA10V/W are strong filtering ability, long service life, and convenient replacement. However, it should be noted that EH oil is toxic synthetic oil that requires careful handling during use to avoid harm to the body.

Actuator working filter DP3SH302EA10V/W is used for the filter element at the hydraulic actuator of high pressure main, high pressure regulating and middle note. When replacing the filter element, first tighten the oil inlet stop valve on the hydraulic servo motor and gradually close the valve. When the valve is fully closed, the filter cover on the outside of the filter element can be unscrewed and the filter element can be pulled out. The filter element and core sleeve are equipped with smooth holes, but without threads. When replacing the filter element, it should be noted that when assembling and disassembling the filter element, do not rotate counterclockwise, otherwise the core sleeve may loosen and be pulled out, the filter element cannot be installed in place, and the filter cover cannot be properly covered, which may cause oil leakage.