Brushing dipping adhesive HDJ-138 is a room temperature curing two component adhesive mainly composed of low viscosity epoxy resin and synthetic resin curing agents. The following are some advantages and characteristics of this product:

1. Excellent mechanical and electrical performance: After coating with brushing dipping adhesive HDJ-138 and curing, it has excellent mechanical and electrical performance, which can meet the insulation needs of various motors.

2. Low temperature curing: Compared with traditional high temperature curing adhesives, HDJ-138 has a lower curing temperature, which can save energy and labor, and improve production efficiency.

3. High heat resistance level: HDJ-138 has a high heat resistance level and can meet the requirements of use in high-temperature environments.

4. Long storage period: Under appropriate storage conditions, HDJ-138 has a longer storage period and a reliable service life.

5. Wide applicability: brushing dipping adhesive HDJ-138 can be used for impregnation and insulation treatment of various types of motor binding tapes and conformal materials, suitable for brush impregnation of stator and rotor of water, thermal power, and excitation machines, as well as for brush impregnation of insulation of AC and DC motors.

6. Good fluidity and adhesion: The colloid of HDJ-138 has the characteristics of low viscosity, strong adhesion of cured products, and good flow ability, which can meet the requirements of various coating and impregnation applications.

7. Easy to use: The usage method of HDJ-138 is simple, just slowly introduce component B into component A, stir thoroughly, and mix evenly before use. After each dispensing, it should be used up within the applicable period.

Brushing dipping adhesive HDJ-138 belongs to the category of coating impregnation adhesive. Its appearance is a light yellow viscous liquid, free of mechanical impurities, with a solid content of 105 ± 2 ℃/2h and an index value of ≤ 24h. It belongs to the high solid type (with a solid content of more than 80%), with a packaging ratio of 2:1 and a total weight of 600G/set. It is composed of A+B two components, and the main components are low viscosity epoxy resin and synthetic resin curing agents. The storage period at room temperature is 12 months without mixing.

From this, it can be seen that brushing dipping adhesive HDJ-138, with its excellent performance and convenient usage, is widely used for brushing and impregnating various types of motor insulation, and is an excellent product worth recommending.