Generator insulating resin class A J793A is an excellent performance epoxy adhesive that can cure at room temperature. When used in conjunction with another component of epoxy adhesive J0793B, it exhibits strong insulation and mechanical strength. The main use of this adhesive is for impregnating the fixed binding rope (tape) at the end of the stator winding of large power generators and for impregnating the conformal polyester felt before use. Through this method, it can effectively improve the insulation strength and mechanical strength of the surface, ensuring the stable operation of electrical equipment.

The advantage of generator insulating resin class A J793A lies in its excellent mechanical and electrical properties. Firstly, its curing temperature is low, which not only saves energy but also reduces working hours. Especially in high-temperature environments, this characteristic is more obvious. Secondly, its high heat resistance level means that it can still maintain stable performance in high-temperature environments, greatly improving its service life. In addition, the storage period of generator insulating resin class A J793A is long, which is conducive to ensuring the quality and effectiveness of the adhesive.

When using generator insulating resin class A J793A, the operation method is simple and convenient. Firstly, mix components A and B together according to the prescribed ratio, and then immediately continue stirring for at least 5 minutes. After stirring evenly, start using. It should be noted that the prepared room temperature cured epoxy adhesive J0793A should be used up within 8 hours to ensure the performance and effectiveness of the adhesive.

In summary, generator insulating resin class A J793A, with its unique performance and convenient use method has become an ideal choice for impregnating fixed binding ropes (tapes) at the end of large generator stator windings and for impregnating conformal polyester felt before use. It not only improves the insulation strength and mechanical strength of the surface, ensures the stable operation of electrical equipment, but also has advantages such as energy saving, short working hours, high heat resistance level, and long storage period.