The thermal power filling adhesive HDJ-14 is mainly composed of epoxy resin, fillers, and curing agents, and is a two-component filling adhesive that cures at room temperature. This product has the advantages of high mechanical strength and good dielectric performance, providing reliable guarantee for the stable operation of power equipment.

Characteristic

1. High mechanical strength: The Thermal power filling adhesive HDJ-14 has high mechanical strength, which can effectively withstand various stresses generated by power equipment during operation, thereby ensuring long-term stable operation of the equipment.

2. Good dielectric performance: The Thermal power filling adhesive HDJ-14 has excellent dielectric performance, which can effectively suppress electromagnetic interference, reduce losses during equipment operation, and improve equipment efficiency.

3. Room temperature curing: The Thermal power filling adhesive HDJ-14 can complete the curing process at room temperature, reducing construction difficulty and improving construction efficiency.

4. Strong adaptability: The Thermal power filling adhesive HDJ-14 has strong adaptability and can be adjusted according to different occasions and needs to meet the requirements of various application scenarios.

Purpose

Thermal power filling adhesive HDJ-14 is mainly used for filling the insulation box of the parallel end of the stator coil of the steam turbine generator. By filling the insulation box, the overall performance of the insulation system can be improved, the failure rate can be reduced, and the safe and stable operation of power equipment can be ensured.

Application

1. In the construction of the stator coil of the steam turbine generator, first remove the A and B components, knead them together, and mix the two components evenly. Then fill the mixed gel into the insulation box to ensure full filling.

2. If the temperature is low, the Thermal power filling adhesive HDJ-14 may clump. At this point, the colloid can be baked at 60 ℃ for more than 4 hours, allowing it to melt and still be used.

3. During the construction process, attention should be paid to maintaining the uniformity of the filling adhesive to avoid bubbles and uneven solidification. At the same time, it is necessary to ensure the cleanliness of the insulation box to avoid affecting the filling effect.

In short, the Thermal power filling adhesive HDJ-14 plays an important role in the insulation system of power equipment due to its excellent performance. During use, construction should be carried out strictly in accordance with operating procedures to ensure the full performance of the RTV epoxy adhesive and provide a solid guarantee for the safe and stable operation of power equipment.