Choosing high-quality bladder materials can ensure the reliable operation of the NXQAB 80/10-L oil accumulator in specific working environments and extend its service life. In practical applications, based on the characteristics and working conditions of liquid media, it is necessary to carefully evaluate and select suitable materials to meet the requirements of corrosion resistance.

When selecting the material of the oil accumulators, it is necessary to consider the following aspects of corrosion resistance:

• 1. Corrosive media: First, consider the properties and composition of the corrosive media that the accumulator will come into contact with. Different corrosive media may have different corrosive effects on materials, so it is necessary to choose materials that can resist specific corrosive media.
• 2. Temperature and pressure: The corrosion performance is also related to the temperature and pressure conditions under which the accumulator is located. Some materials may be more susceptible to corrosion at high temperatures or pressures, so it is necessary to choose materials with good corrosion resistance to adapt to these conditions.
• 3. Oxidation and acid-base properties: The corrosion resistance is also related to the oxidation and acid-base properties of the accumulator material. Some corrosive media may have oxidizing or acid-base properties, so it is necessary to choose materials that can resist oxidation or acid-base erosion.
• 4. Corrosion rate: It is also necessary to consider the resistance of the accumulator material to corrosive media, that is, the corrosion resistance of the material. The corrosion rate of different materials may vary, and it is necessary to choose a material with a lower corrosion rate to ensure the lifespan and reliability of the accumulator.
• 5. Other environmental factors: In addition, other environmental factors need to be considered, such as humidity, climatic conditions, concentration of chemical substances, etc. These factors may also have an impact on the corrosion resistance of the accumulator material, so comprehensive consideration is needed.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
Accumulator Pre Charge Kit Nxq-Ab-100/10
Accumulator Cylinder Nxq-A-/31.5-L-Y
Flanged Needle Valve Shv6.4
Proportional Relief Valve Db15G-2-L5X/5U/2, L11-08069-00004
Hydraulic Stop Valve Khwj40F1.6P
Piston Pump Hydraulic System Pvh098R01A250000002001Ab010A
2 Way Solenoid Valve Ccp230D
Servo Valoves For Pinch Roll Sv4-20(15)57-80/40-10-S451
Mechanical Hydraulic Servo Valve D633-7392
Dual Stage Rotary Vane Vacuum Pump P-2402