The DC voltage sensor WBV334aS1-0.5 is specially designed to measure the pulsating DC voltage in the power grid or circuit. In the power plant system, WBV334aS1-0.5 can monitor the DC voltage status of generator sets, transformers and other key equipment in real time. Its high precision and high isolation performance ensure safe and reliable operation in high-voltage environments. They can not only monitor voltage changes in real time, but also provide engineers with accurate data support to timely discover and solve potential problems. Next, let’s talk about the specific application of this voltage sensor in the power plant system.

Product Overview

The DC voltage sensor WBV334aS1-0.5 is a high-precision DC voltage measurement device that adopts advanced modulation and demodulation isolation principles. It has the characteristics of high isolation, low drift, wide temperature adaptability, etc., and can work stably in harsh environments. In addition, the sensor also has fast response capabilities, can capture voltage fluctuations in real time, and provide strong guarantees for the safe operation of the power plant system.

It supports DC 0-1000V input voltage and output current signal of DC 4-20mA to meet various measurement needs. Reaching level 0.2, ensuring the accuracy of the measurement results. Highly reliable isolation is achieved between input and output, and power supply to prevent interference signals from intruding and improve system stability. With fast response capability, it can capture voltage fluctuations in time and provide timely and effective protection for the system.

Detailed explanation of application cases

1. Generator voltage monitoring

In power plants, the stable operation of generator sets is crucial. WBV334aS1-0.5 DC voltage sensor is widely used in generator voltage monitoring systems. By real-time monitoring of the output voltage of the generator set, engineers can understand the operating status of the unit in a timely manner to ensure the stability and reliability of power supply.

Specifically, the sensor is installed at the output end of the generator set, converts the voltage signal into a current signal, and then transmits it to the data acquisition system for processing and analysis. Once an abnormal voltage fluctuation is detected, the system will immediately issue an alarm signal to remind engineers to deal with it in time.

2. Transformer voltage monitoring

The transformer is one of the important equipment in the power plant, and its voltage stability has an important impact on the safe operation of the entire system. WBV334aS1-0.5 DC voltage sensor is also suitable for transformer voltage monitoring.

By installing on the high-voltage or low-voltage side of the transformer, the sensor can monitor the input and output voltage of the transformer in real time to ensure that the transformer operates stably within the rated range. In addition, combined with other equipment such as temperature sensors, comprehensive monitoring and management of the transformer can also be achieved.

3. DC power system monitoring

The DC power system in the power plant provides a stable DC power supply for various control equipment and protection devices. The WBV334aS1-0.5 DC voltage sensor plays an important role in the monitoring of the DC power system.

By real-time monitoring of the voltage changes of the DC power system, the sensor can promptly detect and deal with problems such as battery aging and insufficient charging to ensure the stability and reliability of the DC power system. At the same time, combined with other monitoring equipment, remote monitoring and management can also be achieved to improve operation and maintenance efficiency.

4. Power system fault diagnosis and early warning

During the operation of the power system, the occurrence of faults is often difficult to avoid. In order to reduce the occurrence rate of faults and handle faults in a timely manner, power plants need to establish a complete fault diagnosis and early warning system. As one of the key components, the WBV334aS1-0.5 DC voltage sensor plays a vital role.

By real-time monitoring and analysis of voltage data, the sensor can help engineers identify potential faults in a timely manner and issue early warning signals. This helps power plants take targeted measures to prevent and deal with them, thereby avoiding or reducing the occurrence of faults.

When looking for high-quality, reliable current and voltage sensors, YOYIK is undoubtedly a choice worth considering. The company specializes in providing a variety of power equipment including steam turbine accessories, and has won wide acclaim for its high-quality products and services. For more information or inquiries, please contact the customer service below:

E-mail: sales@yoyik.com
Tel: +86-838-2226655
Whatsapp: +86-13618105229