The 4WH32HD-50 reversing valve is widely used in power plants, and its precise hydraulic control capability makes it an important control element. However, electrical connection problems may cause the valve to not work properly, which not only affects production efficiency, but may also cause equipment failure and safety risks. Therefore, technical workers need to have a deep understanding and proficiency to quickly locate and repair these problems.

Step 1: Check the electrical power supply

First, make sure that the power supply of the 4WH32HD-50 reversing valve is normal. Check whether the power supply voltage and current meet the specifications. Usually, the power supply requirements of the reversing valve are detailed in the equipment manual, including voltage range, current capacity, etc. If the power supply is unstable or exceeds the specified range, it may cause the valve to fail to open or close normally.

Step 2: Check the cable connection

Second, check the cable connection of the 4WH32HD-50 reversing valve. Poor cable connection or poor contact is one of the common electrical problems. Make sure all connections are tight and not loose, and the cable terminals are clean and in good contact. Especially in high temperature or humid environment, cable connection is susceptible to corrosion and oxidation, which may lead to increased resistance or poor contact, thus affecting the electrical signal transmission of the valve.

Step 3: Check the control signal line

The third step is to check the control signal line of the reversing valve 4WH32HD-50. The control signal line transmits the switch command of the valve, such as controlling the opening, closing or middle position of the valve. Check whether the control signal line is disturbed or damaged, such as external electromagnetic field interference, cable damage or loose terminal. Ensuring that the control signal line is stable and reliable is an important guarantee for the normal operation of the valve.

Step 4: Use test instruments for electrical testing

After confirming the above common problems, professional test instruments can be used to further diagnose the electrical connection of the reversing valve. Commonly used test instruments include multi-purpose meters, oscilloscopes (and resistance testers, etc. These instruments can measure voltage, current, resistance and signal waveforms to help determine the specific problems with electrical connections.

Step 5: Check the control panel and electrical components

Finally, check the control panel and electrical components of the reversing valve 4WH32HD-50. Circuit boards, relays, fuses and wiring terminals on the control panel may cause electrical connection problems due to aging, short circuits or failures. Regular inspection and maintenance of the control panel can prevent most potential electrical failures and extend the service life of the equipment.

Yoyik offers various types of valves and pumps and its spare parts for power plants:
high pressure oil pump 150LY-23
Globe valve HQ14.01Z
Motor shaft head bushing P-2340
Inflatable seal dome valve-DN100 P1586C-01
6v solenoid valve 22FDA-F5T-W110R-20L/P
hydraulic valve coil 3D01A011
Accumulator charge adapter 10L
Shaft bearing 2 Pcs /80DV PHV P19183E-00
VALVE SAFETY A41H-16C
solenoid valve pneumatic 3D01A009
Limit switch A2033
OIL PUMP SQP32-38-14VQ-86-DD-18
main oil pump Inverted bucket TCM589332-00G
Sequence valve F3-CG2V-6FW-10
valve PP3-N03BG
Oring A156.33.01.10-24X2.4
sealing oil Re-Circulating pump bearing HSNH280-43Z
Recirculating oil pump mechanical seal KZB707035
screw type impeller HSNH440-46
Pump bearing HSNH4400Z-46NZ