The solenoid valve coil CCP115D is an individually removable coil accessory produced by Parker Company. It is widely used in the AST (Auto-Stop Trip) system and OPC (Over-Pressure Protection Circuit) module of power plants.

The working principle of the solenoid valve coil CCP115D is based on electromagnetic induction. When current passes through the coil, a magnetic field is generated, and the magnetic lines pass through the magnetic circuit in the valve, causing magnetic force to act on the magnetic valve core or valve disc, causing it to move to open or close the valve channel. When the current is interrupted, the magnetic field disappears and the magnetic valve core or disc returns to its original position by spring force or other mechanical mechanisms, thus closing the valve channel.

Solenoid valve coil CCP115D plays an important role in the AST and OPC modules of power plants. The AST system is responsible for quickly and safely stopping steam turbine operation in emergency situations to prevent equipment overload or damage. The OPC system is used for over-voltage protection to ensure that the system can automatically activate the safety mechanism when the pressure is abnormal to avoid equipment damage and personal injury.

In addition, CCP115D solenoid valve coil can also be used in other industrial fields, such as petroleum, chemical industry, water treatment, aerospace, etc., to control the flow and cutoff of fluid media. In these application scenarios, the efficient operation of solenoid valve coils is of great significance to ensuring system safety and improving production efficiency.

When installing the solenoid valve coil CCP115D, ensure that the coil and valve are connected correctly and the voltage is stable to avoid overloading. At the same time, ensure that the coil is installed in a dry, well-ventilated, and non-corrosive gas environment to extend the service life of the coil.

In terms of maintenance, regularly check the appearance, connection lines, insulation performance, etc. of the solenoid valve coil to ensure that the coil is not damaged, short-circuited, or open-circuited. If there is any abnormality, it should be replaced or repaired in time to ensure the normal operation of the solenoid valve coil.

Yoyik can offer many spare parts for power plants as below:
Pneumatic double slide valve Z644C-10T
Pump DM6D3PB
Recirculating oil pump bearing sleeve HSNH210-46Z
Jacking Oil Pump AA10VS045DFR1/31R-VPA12N00/
relief valve 2″LOF-98H
Pump TOE/CY-6091.0822
solenoid valve FRD.WJA3.001
bellows relief valve 98H-109
SERVO VALVE SM4 20 (15) 57 80/40 10 S182
Servo valve G631-3017B
solenoid valve 3D01A009
oil screw pump HSNS210-42
solenoid valve 22FDA-F5T-W110R-20/BO
Condensation water Trap Valve 1F05407
SOLENOID 4420197142