EH Circulation Pump HQ39.02Z-1 is a high-performance circulating pump designed for turbine circulating oil systems. The main function of the pump is to ensure the stable operation of the circulating oil system and provide the necessary oil circulation and cooling for the normal operation of the turbine. Its design features and high performance make it an indispensable key component in the turbine circulating oil system.

Functional features

- Provide oil supply pressure: EH Circulation Pump HQ39.02Z-1 supplies the required oil pressure to the EH system by sucking hydraulic oil and generating pressure to meet the system’s power and energy requirements for oil.

- Achieve oil circulation: The oil in the EH system needs to circulate to maintain a constant flow state. The EH Circulation Pump will circulate the hydraulic oil in the system to ensure normal oil flow and recycle and reuse the used oil.

- Maintain system stability: The EH Circulation Pump provides stable oil pressure and flow, ensuring the normal operation of various components of the EH system (such as actuators, valves, etc.) and maintaining the stability and reliability of the system.

- Maintain high volumetric efficiency: The EH Circulation Pump can maintain high volumetric efficiency for a long time, which means that it can pump liquid with higher efficiency, reducing energy consumption and working time. High volumetric efficiency ensures that the pump can still maintain a high pumping capacity during long-term operation, improving the working efficiency of the system.

- Strong anti-pollution performance: The pump has strong anti-pollution performance, which can effectively resist the influence of pollutants on the internal parts of the pump, reducing the failure rate and maintenance times of the pump. This is essential to maintain the reliability of the pump and extend its service life.

- Low flow fluctuation and noise: The EH Circulation Pump adopts the design of an internal meshing pump, which makes it have a lower flow fluctuation and noise level. The internal meshing pump can run smoothly, reduce flow fluctuations and noise generation, and provide a more stable and quiet working environment.

EH Circulation Pump HQ39.02Z-1 is widely used in the following fields:

- Power plant: In power plant, EH Circulation Pump is used in the circulating oil system of steam turbine to ensure the normal circulation and cooling of oil and ensure the safe and stable operation of steam turbine.

- Petrochemical: In the petrochemical industry, EH Circulation Pump is used in various systems that require high pressure and high flow oil circulation to ensure the normal operation of equipment.

- Metallurgical industry: In the metallurgical production process, EH Circulation Pump is used to control the supply of cooling water, gas and other media to ensure the normal operation and production efficiency of equipment.

Installation and maintenance

- Installation points: When installing EH Circulation Pump HQ39.02Z-1, it is necessary to ensure that the flow direction of the pump is consistent with the flow direction marked in the pipeline to avoid reverse flow caused by installation errors. At the same time, it is necessary to ensure the sealing of the connection between the pump and the pipeline to prevent medium leakage.

- Maintenance suggestions: Regularly check the sealing performance and operating flexibility of the pump to detect and deal with potential problems in a timely manner. During maintenance, pay attention to the protection of key components such as pumps to avoid damage caused by improper operation. Clean dust and debris on the surface of the pump regularly, and keep the heat sink clean and unobstructed to facilitate heat dissipation.

EH Circulation Pump HQ39.02Z-1 has become an indispensable key component in the turbine circulating oil system with its excellent performance and versatility. It can not only effectively provide oil circulation and pressure, but also maintain stable performance in various harsh environments to ensure the safe and stable operation of the equipment.

By the way, we have been supplying spare parts for power plants around the world for 20 years, and we have rich experience and hope to be of service to you. Looking forward to hearing from you. My contact information is as follows:

Tel: +86 838 2226655

Mobile/Wechat: +86 13547040088

QQ: 2850186866

Email: sales2@yoyik.com