In the process of ensuring the normal operation of the main oil pump of steam turbine units of 300MW and below, the main pump inlet filter element AX1E101-01D10V/-W plays a vital role. The main task of this filter element is to ensure the cleanliness of the bearing lubricating oil and speed control system oil supplied to the steam turbine unit, and to prevent impurities in the oil from causing damage to the unit. In the steam turbine unit, the main oil pump is responsible for supplying lubricating oil to the bearings and speed control system to ensure good lubrication and precise control under high-speed operation. The filter element is installed at the inlet of the main oil pump. Its main purpose is to capture solid particles and contaminants in the oil, thereby protecting the normal operation of the oil pump and the entire lubrication system.

The performance of the filter element AX1E101-01D10V/-W is crucial to the stable operation of the steam turbine unit. By keeping the oil clean, the filter element helps improve the operating efficiency of the unit, reduce maintenance costs, and extend its service life.

In order to ensure that the filter element AX1E101-01D10V/-W can effectively intercept particles and pollutants in the oil, the following measures can be implemented:

1. 1. Choose the right material: Make sure the material of the filter element has high strength, corrosion resistance and sufficient filtration efficiency. Commonly used materials include stainless steel and synthetic fibers, which are able to maintain their performance under high temperatures and pressures.
2. 2. Verify filtration efficiency: Ensure that the filter element can effectively capture tiny particles and pollutants, while ensuring that the fluid flow is not affected and the pressure drop is minimized.
3. 3. Ensure pressure resistance: the filter element must be able to withstand the pressure generated by the main oil pump to avoid damage due to excessive pressure. Ensure that the material and structural design of the filter element can meet the working pressure requirements.
4. 4. Pay attention to installation and maintenance: Install the filter element correctly according to the guidelines provided by the manufacturer, ensuring its accurate position to avoid bypass flow and leakage. Carry out regular maintenance on the filter element, including replacement and cleaning, to maintain its filtration effect and pressure resistance.

By implementing these measures, it can be ensured that the filter element AX1E101-01D10V/-W can effectively intercept particles and pollutants in the oil, ensure the cleanliness of the oil, protect the normal operation of the main oil pump and the entire lubrication system, and improve the operating efficiency of the unit. and extend its service life.

There are other different filter elements used in power plants as below. Contact Yoyik for more types and details.
Filter element DPlA601EA03V/-W
Stainless steel filter screen 2-5685-0018-00
FILTER, FOR SERVO BFPT DR0030D003BN/HC
Filter element DQ8302GA10H3.5S
EH oil station air filter PFD-8AR
Oil supply pump inlet oil filter SDGLQ-36T100K
Oil purification device separation filter element DQ600QFLHC
Recycle pump washing filter DP1A401EA01V/-F
High pressure filter HPU250A-GE-STO-061-1
NUGENT filter element 1535096
ion-exchange resin filter PA810-005D
Filter element of Oil UX-25 x 80
Lubricating oil coalescing filter element DQ600EJHC
Oil-return Filter 1262959-0160-R-003-ON/-V-P/CI
Lubricating oil pre-filter DQ600EW100HC
ion exchange filter ET718-DR-CN