Jacking oil pump oil-suction filter FRD.WJA1.017 designed for large steam turbines. It is located at the oil inlet of the oil pump and plays the role of a “gatekeeper”. During the cranking operation before the turbine is started or after shutdown, the jacking oil pump is responsible for injecting high-pressure oil into the rotor and bearing oil pockets to reduce friction, provide necessary lubrication, and protect key components from damage. The cleanliness of the oil directly affects the efficiency and safety of this process. Any tiny impurities may cause oil circuit blockage, accelerated component wear, and even cause serious equipment failure. Therefore, the existence of FRD.WJA1.017 is essential for maintaining the high purity of the oil and ensuring the stable operation of the jacking oil pump and the entire steam turbine system.

The design of the jacking oil pump oil-suction filter FRD.WJA1.017 fully considers the harshness of the application environment and adopts corrosion-resistant and wear-resistant high-performance materials to ensure that it can maintain good physical and chemical stability when in long-term contact with lubricating oil and other media. Its optimized structural design can not only effectively intercept various impurities and solid particles in the oil, but also take into account the fluid permeability, reduce the impact on the suction of the oil pump, and ensure that the oil path is unobstructed. In addition, the sealing performance of the filter element has been carefully designed and tested to ensure that oil leakage can be effectively prevented even in a high-pressure environment, further improving the safety of the system.

Recognizing the importance of filter element maintenance in extending the life of the equipment, the jacking oil pump oil-suction filter FRD.WJA1.017 is also designed to be easy to maintain. Users can easily clean or replace it regularly without complex tools, greatly reducing maintenance costs and time. The recommended maintenance cycle should be determined according to the specific working conditions and the degree of oil contamination. Check the oil sample regularly, monitor the filter element blockage, and replace the saturated filter element in time to avoid potential risks caused by filter element failure.

In summary, the jacking oil pump oil-suction filter FRD.WJA1.017 is not only a small component in the operation and maintenance of the steam turbine, but also one of the key factors to ensure the safe and efficient operation of the entire generator set. Its efficient filtering performance, durable material selection, and convenient maintenance methods together build a solid barrier to protect the heart of the steam turbine. In today’s pursuit of efficient energy utilization and equipment reliability, choosing high-quality FRD.WJA1.017 filter elements is undoubtedly an effective way to improve the overall performance of equipment and reduce operating costs.