Speaking of the induced draft fan blade seal ring HU27054-22G, it has special corrosion resistance and high temperature resistance. Today, let’s talk about the installation and maintenance requirements of this seal to help power plant users ensure the long-term and stable operation of the induced draft fan.

The installation requirements of the HU27054-22G seal are very strict and must be installed accurately. First, make sure that the installation surface is clean and oil-free, which helps to improve the installation accuracy of the seal. Then, according to the requirements of the drawing, use special tools to accurately install the seal to the root of the blade to ensure that the seal fits tightly with the root of the blade to avoid gaps. During the installation process, make sure that the seal is not twisted or damaged, which will affect the sealing effect.

The maintenance requirements of the HU27054-22G seal are equally important. Check the status of the seal regularly to ensure that there is no wear, cracks or deformation. If the seal is found to be damaged, it must be replaced in time to avoid affecting the normal operation of the fan. In addition, clean the root area of ​​the blade regularly to remove dust and debris that may affect the sealing effect. For long-term operation of fans, it is recommended to carry out a thorough inspection and necessary maintenance at least once a year.

HU27054-22G seals have special corrosion resistance and high temperature resistance. In order to adapt to the complex working conditions in the power plant environment, seals are usually made of high temperature and corrosion resistant materials, such as fluororubber or silicone rubber. These materials can withstand high temperatures and chemical corrosion, ensuring that the seals can operate stably for a long time in harsh environments.

The materials used in the seals have excellent corrosion resistance. Fluororubber is a commonly used material that can resist the erosion of most acid and alkali solutions and solvents and is suitable for a variety of chemical media. In addition, the surface of the seal is specially treated to further enhance its corrosion resistance.

In order to ensure that the seal can withstand high temperature environments, both material selection and structural design are very critical. The materials used in the HU27054-22G seals not only have good high temperature resistance, but also the structural design takes into account the expansion and contraction characteristics at high temperatures. This design enables the seal to maintain a good sealing effect at high temperatures.
Yoyik offers various types of spare parts for power plant main turbine, generator and auxiliary equipment:
Stainless steel anti-wear block Generator QFQS-200-2
sliding bearing DTYD100UZ024
Fd Fan GU15036.02
Balance drum bushing 3FK5D32M-04-11
GASKET SPIRAL MS INLET 2Cr12NiW1Mo1V Steam Turbine Combined Intermediate Valve
special bolt stud 2Cr12NiW1Mo1V Steam Turbine RSV
Small roller shaft CO46-19-3
Cylinder group connecting rod TY96010
Seal Tandem TY9110C
ring DTPD60UZ011
Guide ring DTYD60TY006
Connector DG600-240-05-17
Main bearing assembly DTYJ100AZ001
Processing of inner oil cover Generator QF-60-2
Seal ring U184010
Special high-temperature slotted nut GH6″ 40Cr2MoVA Steam Turbine HP cylinder
movable joint dilation band DTYD30UI006
Bearing CO46-09-04A
Guide vane bushing FK5G32-04-03
HP inner casing with grooved special nut 2Cr12NiW1MolV Steam Turbine Steam chamber