Filter element RLFD W/HC1300CAS50V02 is a high-efficiency oil filter designed for key equipment in power plants (such as turbines, generators, hydraulic systems and fuel supply systems). The multi-layer composite filtration technology can accurately intercept metal particles, colloids, water and pollutants in the oil, ensuring that the oil cleanliness reaches NAS 12 or ISO 4406 Class 9 standards, thereby ensuring the efficient and stable operation of the equipment and reducing the failure rate and maintenance costs.

Core technical advantages

1. Ultra-precision filtration performance

- Gradient filtration structure: Filter element RLFD W/HC1300CAS50V02 adopts 304 stainless steel mesh (intercepting large particles of impurities), polyetheretherketone (PEEK) sintered layer (capturing micron-sized particles) and hydrophobic separation membrane (separating free water) to achieve three-stage collaborative filtration with a filtration accuracy of 5μm, completely avoiding the wear of impurities on precision parts.

- High dirt holding capacity design: The filter element surface is specially treated to greatly improve the impurity adsorption capacity, and the service life is extended by more than 30% compared with traditional filter elements.

2. Adaptability to extreme working conditions

- High temperature and high pressure resistance: The filter element material has passed the thermal stability test and can work for a long time in the temperature range of -20℃ to 250℃, with a pressure bearing capacity of 1.6MPa, which is suitable for the filtration of high-temperature lubricating oil of steam turbines in power plants.

- Chemical compatibility: The corrosion-resistant coating is used to resist the corrosion of sulfides, acidic substances and additives in the fuel, which is especially suitable for the purification needs of heavy fuel oil systems in coal-fired power plants.

3. Intelligent operation and maintenance management

- Real-time monitoring of pressure difference: The built-in pressure difference sensor is linked to the power plant DCS system through a digital interface. When the filter element is blocked, an alarm is automatically triggered to avoid equipment shutdown due to insufficient oil flow.

- Modular quick-install design: The snap-on interface is used, and the filter element can be quickly replaced without tools. The single-person operation takes less than 5 minutes, which significantly improves maintenance efficiency.

Typical application scenarios

1. Steam turbine lubrication system: filter metal grinding chips and oxidation products in lubricating oil, prevent abnormal wear of key components such as bearings and gearboxes, and extend the overhaul cycle of equipment.

2. Fuel supply system: accurately remove moisture, colloid and particulate matter in diesel or heavy oil, ensure the atomization effect of the injector nozzle, improve combustion efficiency and reduce carbon emissions.

3. Hydraulic control system: purify impurities in hydraulic oil, avoid servo valve and proportional valve blockage, and ensure high-precision response of the turbine speed control system.

4. Generator cooling oil circulation: filter suspended matter in cooling oil, prevent damage to the insulation layer of stator coil, and improve the safety of generator operation.

Installation and maintenance guide

- Installation specification: It is recommended to install horizontally in the main circulation pipeline of the oil circuit, and the inlet and outlet directions must be consistent with the arrow mark; it must be thoroughly flushed before the first use to avoid impurities.

- Maintenance cycle: According to the operating conditions of the unit and the oil test report, the regular replacement cycle is 6-12 months; when the pressure difference exceeds 1.5 times the initial value, the filter element must be replaced immediately.

- Supporting services: Provide customized filter element selection solutions, on-site installation guidance and remote diagnosis support, and promise to respond to customer needs within 48 hours.

The filter element RLFD W/HC1300CAS50V02 has become an indispensable core component of the oil and liquid system of power plants due to its high-precision filtration, long life tolerance and intelligent operation and maintenance capabilities. Whether it is a traditional coal-fired power plant or a modern gas turbine or offshore wind power project, this product can provide reliable protection for the efficient and stable operation of the equipment. If you need detailed technical parameters or customized solutions, please contact the professional engineer team.

By the way, we have been supplying spare parts for power plants around the world for 20 years, and we have rich experience and hope to be of service to you. Looking forward to hearing from you. My contact information is as follows:

Tel: +86 838 2226655

Mobile/Wechat: +86 13547040088

QQ: 2850186866

Email: sales2@yoyik.com