On the filter integration module of the steam turbine oil actuator, a shut-off valve SHV25 is usually used. This type of stainless steel globe valve is a common type of valve used to control the opening and closing of fluids. In the filter integration module, the shut-off valve SHV25 is installed on the pipeline entering and leaving the filter, playing the following functions:

Fluid control: The shut-off valve SHV25 can achieve precise control of the fluid, allowing or preventing it from passing through the filter. When filter maintenance, replacement, or repair is required, closing the shut-off valve can stop the flow of fluid and ensure the safety and cleanliness of the work area.

Maintenance and Protection: The shut-off valve SHV25 in the filter integration module can easily isolate the filter, allowing it to be maintained and maintained independently of other system components. By closing the shut-off valve, fluid can be prevented from continuing to pass through the filter, thereby avoiding unnecessary pressure or flow loads on the system during maintenance.

Emergency cut-off: The shut-off valve SHV25 can also be used as an emergency cut-off device in emergency situations. When a system malfunction or dangerous situation occurs, closing the shut-off valve can quickly cut off the flow of fluid to prevent further damage or danger.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
Repair Package Of Seal Oil Recirculation Pump Acg060N7Nvbp
Jacking Oil Pump In Power Plant A10Vs0100Dr/31R-Ppa12N00
Dn50 Globe Valve Ljc50-1.6P
Oil Pump Jack System A10Vs0100Dr13/31R-Ppa
Tapper Roller Bearing Nj 207
Ac Reciprocating Pump A10Vs0100Dr/31R-Ppa12N00
Servo Valoves For Pinch Roll S15Fofa4Vbln
Sealing Oil Re-Circulating Pump Cushion Hsns210-42
Mechanical Seal-De L270/116
Globe Valve 2 J61H-320 Dn50