HBX-250*10 STG Jacking Oil Outlet filter (Small) hydraulic filter element

The HBX-250*10 filter element is installed on the pressure pipeline of the hydraulic system to filter out the mechanical impurities mixed in the hydraulic oil and the colloid, asphalting, carbon residue, etc. produced by the chemical change of the hydraulic oil itself, so as to prevent the valve core from being stuck, the orifice gap and damping hole from being blocked, and the hydraulic components from wearing too fast.

The filter element HBX-250*10 is the outlet filter element of the jacking oil pump, which is installed at the outlet of the jacking oil pump. When the hydraulic oil flows out of the jacking oil pump, it is filtered to remove impurities and keep the oil clean, thus reducing the vibration and noise of the entire oil pump assembly and ensuring the excellent and reliable performance of the system. The jacking device is an important part of the steam turbine unit, which plays a role in jacking the rotor when turning for warming up and uniform cooling during the unit startup and shutdown. The elliptical bearings of the steam turbine generator unit are all equipped with high-pressure jacking oil pockets. The high-pressure oil provided by the jacking device forms a hydrostatic oil film between the rotor and the bearing oil pocket, forcing the rotor to be jacked up, avoiding dry friction between the shaft song and the bearing bush during the low speed process of the steam turbine, reducing the turning torque, and playing an important role in protecting the unit, especially the rotor and the bearing

HBX-250*10 Filter Cartridge The outlet filter element of the jacking oil pump produced by Dongfang YOYIK is made of glass fiber filter material. The filter element is compact in structure and has the advantages of high filtering accuracy, large oil passing capacity, small original pressure loss, large dirt holding capacity, etc. The filter element HBX-250*10 has good filtering effect and can effectively control the pollution degree of the working medium. When the system prompts that the filter element needs to be replaced, the installation and cleaning are convenient and quick, and the filter element can be replaced by removing it directly.

The product properties of HBX-250*10 filter element are as follows:
Medium: hydraulic oil;
Filter precision: 10μm；
Nominal pressure: 32Mpa;
Connection mode: plate type;

Prompt: The filter is equipped with a transmitter, which will send a signal when the filter element is blocked by pollutants and the vacuum degree at the oil outlet is 0.35MPa. The filter element should be replaced or cleaned in time to protect the system safety.

Our products have been used and trusted by most power plants in the world, such as Indonesia's Indonesia Power Banten 1 Suralaya, PJB PLTU REMBANG, Bangladesh's Sirajganj 225 MW CCPP, India's Wardha Power Generation Private Limited, and Vietnam’s Duyen Hai 1 Thermal Power Plant and so on. Our strict requirements on product quality make our products have good working performance, ensure the safe and stable operation of the generator set, and reduce the operation and maintenance cost of the power plant. Well received among users. If you are also interested in our products, please do not hesitate to contact us, we will use our nearly 20 years of power plant supply experience to provide you with products and maintenance solutions that meet your needs.