The room temperature curing epoxy adhesive HEC56102 is an epoxy resin specially designed for insulation applications. It has good insulation and adhesion properties, and is suitable for insulation coating and bonding the stator and rotor of steam turbine generator, hydro generator, thermal generator and exciter.

If you need to check the quality of your epoxy adhesive HEC56102, you can refer to the following steps.

1. 1. Appearance inspection: check the appearance of the HEC56102 epoxy glue solution, which should be uniform, without particles, obvious sand holes or impurities. Check whether there is obvious unevenness or abnormality.
2. 2. Viscosity evaluation: use appropriate viscosity measuring instruments to measure the viscosity of the epoxy resin. Or the viscosity can be judged by the fluidity and consistency of the glue. If the viscosity exceeds the predetermined range, the coating performance and curing effect may be affected.
3. 3. Curing performance evaluation: take a small amount of samples and mix them. After curing, observe whether the HEC56102 glue has good hardness, adhesion and strength, and whether there are problems such as peeling and cracking. Suitable test methods can be used, such as tensile test, peel test, etc.
4. 4. Test report: check the test report provided by the manufacturer to confirm that it conforms to relevant standards and specifications. The test report can provide information about the physical properties, electrical properties, and so on.

Check more types of epoxy resin for steam turbine generators. Yoyik offers various kinds of insulating material for power plants.
Room Temperature Epoxy Adhesive 841
Room Curing Compound 650
RTV Epoxy Adhesive 792 AB
Solvent-Free RTV Adhesive 53841WC
Brushing Dipping Adhesive HDJ-138B
RTV Epoxy Adhesive J0139
Epoxy Adhesive 132
Epoxy Adhesive J0793A
Room Temperature Curing Agent J-0708/A
Insulation Adhesive YQ53841
Epoxy RTV Adhesive HEC-51106