Low pressure accumulator NXQ A10/10 F/Y consists of stainless steel shell, rubber bladder, oil valve, air valve, etc. The rubber bladder bag is the core component of the low-pressure accumulator. It has good elasticity and sealing performance, and can effectively expand and contract under the pressure change.

The following factors need to be considered when selecting the bladder material:

• Withstand pressure performance: the low-pressure accumulator NXQ A10/10 F/Y is under low pressure during operation, and the bladder material shall have sufficient withstand strength to ensure that it will not crack or fail under high pressure.
• Heat Resistance: If the hydraulic system is operating at a high temperature, the material of the NXQ A10/10 F/Y bladder needs to be heat resistant to maintain its elasticity and tightness.
• Wear resistance and corrosion resistance: most hydraulic equipment may have certain wear and corrosion factors in the working environment, and the bladder material needs to have good wear resistance and corrosion resistance to extend its service life.
• Elasticity Recovery: The pouch needs to have good elasticity recovery, i.e. it can quickly recover to the original state after absorbing and releasing energy to ensure the normal operation of the accumulator NXQ A10/10 F/Y.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
AC Vacuum Pump and Gauge Set P-1753
Bladder for Accumulator Nxq A.25/31.5
Solenoid Valve 22Fda-F5T-W110R-20L/P
Bearing (Upper) B480-0204B-1B
3 Way Servo Valve 072-559A
Check Valve Price 216C40
L.F Single Stream Metering Assy D633K2017B
Globe Control Valve Price Wj10F1.6P
Electro Hydraulic Servo Actuator Sm4-40(40)151-80/40-10-H919H
Eh System Servo Valve D682-4241