The speed sensor HRY1-A100-B02-C02-D05-E080 is a special sensor used to measure the speed of steam turbines. It needs to be debugged after installation to ensure the accuracy of measurement. Here, Yoyik introduces the debugging process of general speed sensors.

Calibration: Use instruments such as a digital oscilloscope or multimeter to calibrate the speed sensor HRY1-A100-B02-C02-D05-E080. Firstly, perform zero calibration on the probe, connect it to a digital oscilloscope or multimeter, and adjust the probe position so that the oscilloscope or multimeter reads zero. Next, perform amplification calibration, convert the voltage output from the oscilloscope or multimeter into a speed value, and compare it with the actual speed. Adjust the amplification until the expected effect is achieved.

Test: carry out the actual test of the rotation speed sensor, rotate the rotor to different speeds, record the output electrical signal value and the corresponding speed value, and check whether the output is normal.

Optimization: Optimize the speed probe based on the test results. If the output signal is unstable or the error is too large, appropriate adjustments can be made, such as adjusting the HRY1-A100-B02-C02-D05-E080 sensor position or increasing the magnification.

Stability test: Connect the speed sensor to the actual control system and conduct a long-term stability test to check if it can work properly.

Yoyik provides different types of rotation speed sensors for power plant users:
Magnetic Pickup Tachometer D-065-05-01
Tachometer Sensor Working Principle QBJ-CS-1
Magnetic Pickup Speedometer ZS-1
Magnetic Pickup Sensor Generator CS-1-065-02
Sensor Magnetic ZS-04-75
SENSOR MEASURING ZS-04-150-3000
Tachometer Magnetic Sensor XS12J3Y
Limit Switch CS-1-G-075-05-01
MEH Speed Sensor ZS-04-75
Vibration Sensor DF6101-005-065-01-09-00-00
SENSOR MAGNETIC SENSOR SPEED G075-05-01
Electromagnetic Rotation Speed Sensor D075-05-01
Magnetic Speed Pickup Sensor SZCB-02
Magnetic Pickup Coil CS-1-D-075-03-01
Magnetic Pickup Sensor SEC-143.35.19
Mag Pickup Speed Sensor CS-1-D-080-10-01