The linear displacement transformer DET200A, also called LVDT sensor, is a commonly used sensor for measuring the linear motion of objects, and it can be used to measure the displacement of steam turbine valves and hydraulic motors. Its installation position is generally in the direction of the object’s motion. When installing the displacement sensor, it is important to ensure the correct installation position, as well as the accuracy and reliability of the sensor. Here, Yoyik has summarized the common installation methods for displacement sensors and recommends them to users of LVDT.

Prepare installation materials: Select a suitable position to install the DET200A LVDT sensor, taking into consideration the range of motion of the object being measured and the convenience of installation. Prepare the necessary tools and materials, such as screws and nuts.

Use screws and nuts to secure the bracket of the displacement sensor DET200A in the direction of the object’s motion, in order to capture the actual displacement of the object. Ensure that the bracket is stable and there is no looseness or obstruction between the sensor and the object being measured.

After the bracket is installed, connect the LVDT sensor to the data acquisition instrument according to the electrical interface of the sensor. This process needs to be done carefully to prevent poor connection or short circuit of the wires. After completion, perform necessary debugging and testing to ensure that the lvdt sensor works properly and can accurately measure linear displacement.

Depending on the specific needs, it is recommended to use appropriate protective measures, such as gaskets or protective covers, during the installation of the sensor to prevent potential damage caused by environmental conditions.