HU25042-221G induced draft fan is a high-performance equipment widely used in the industrial field. The correct installation and adjustment of its blades are essential to ensure the efficient and stable operation of the fan. Today, let’s talk about the correct installation and adjustment of its blade U2616G2106Y00 and see how to ensure that the blade can work properly.

First, prepare the necessary tools and materials. Tools include wrenches, screwdrivers, spirit levels, etc. Materials include installation drawings and instructions, which are the key to ensuring the correct installation of the blades.

Next, check whether the blade U2616G2106Y00 is intact. If there is bending, cracks or damage, it must be replaced in time. The state of the blade directly affects the performance and stability of the fan.

Clean the installation surface to ensure that it is clean and flat. If there is oil or impurities on the installation surface, it will affect the installation accuracy of the blade. Wipe the installation surface with a clean cloth to ensure that there is no residue.

According to the installation drawing, find the alignment mark on the blade and the hub. Align the mark on the blade with the mark on the hub to ensure that the installation position of the blade is correct.

Use a wrench to tighten the screws between the blade and the hub. Be careful not to overtighten to avoid deformation of the blade. Tighten the screws according to the specified torque value to ensure that the blade is firmly mounted on the hub.

Adjust the angle of the blade according to the requirements of the installation drawing. Use a level to check whether the angle of the blade is consistent and ensure that the angle of all blades U2616G2106Y00 is within the specified range. The consistency of the blade angle directly affects the balance and efficiency of the fan.

After installation, perform a balance test. Start the fan and observe whether the fan runs smoothly. If there is obvious vibration, it means that the blade is not installed correctly and needs to be readjusted.

When installing the induced draft fan blade U2616G2106Y00, ensure that the preparation work is in place, check the blade, clean the installation surface, align the mark, fix the blade, adjust the blade angle, and perform a balance test. For technical workers, mastering the correct installation and adjustment methods is the key to ensuring the long-term stable operation of the fan.

Yoyik offers various types of spare parts for power plant main turbine, generator and auxiliary equipment:
spring washer GB000093W0016 1Cr15Ni36W3Ti Steam Turbine LP MSV
Rotor protective cover Generator qfsn2-660-2
Sealing cooling housing FA1D56-03-03
Double headed studs M36*280 35SiMn Steam Turbine HP cylinder
Stop washer 24 Generator QFS-200-2
Flange through-hole equal length stud M20*95 35CrMoA Steam Turbine Combined Intermediate Valve
Insulated water conduit Generator QFQS-200-2
Generator floating outer oil baffle cover Generator QFQS-200-2
Single row slotted ball bearing DTSD60LG019
Sealing gasket of hydrogen cooler Generator QFS-200-2
SCREW,JACK,BFPTOTRCSG 20Cr1Mo1VNbTiB Steam Turbine LP casing
Coupling cover fixing screw 45Cr1MoV Steam Turbine High pressure combined valve
Cylinder group connecting rod DTYD60UI002
SEALRING SEC3,HIPGLANDASY1 1Cr11MoV Steam Turbine control valve
Generator grounding brush braid TZ-1 Generator QF-60-2
guide pin 0069/0070
Sealing gasket Q8A370.1578 Generator QFS-300-2
GLAND SEAL RING-1 35CrMo Steam Turbine IP regulating valve
Slotted cylindrical head screw GB0000065C0616 40Cr2MoVA Steam Turbine Steam chamber
Turbine LP -Blade for stage no-4 (RH side) 18Cr2MnMoB Steam Turbine high pressure control valve