Mechanical seal CZ50-250C is a device that achieves sealing through mechanical parts. It is mainly composed of springs, fork groove transmission, rotating rings, stationary rings, sealing materials, etc. Its function is to prevent medium leakage and ensure the normal operation of mechanical equipment.

Correct installation steps of mechanical seal CZ50-250C:

(1) Before installation, check the surface quality of each part, especially the sealing ends of the dynamic and static rings for bumps and scratches. If damaged, they must be repaired or replaced.

(2) Clean the surface of each part to ensure that there is no oil stain and impurities.

(3) Insert the mechanical seal assembly into the groove at the shoulder of the shaft or sleeve.

(4) Install the rotating ring and the stationary ring on the shaft or sleeve respectively, and be careful not to rotate them.

(5) Install the sealing cover and fix it on the mechanical seal assembly.

(6) Adjust the mechanical seal cover to make it in the appropriate position and ensure that the chamfers and burrs are removed from the end of the sealing ring seat hole of the cover.

(7) Apply a layer of oil to ensure the lubrication of the dynamic and static ring sealing end faces.

The function of mechanical seal CZ50-250C  is to prevent the leakage of media in mechanical equipment. When the mechanical equipment is running, the medium will enter the mechanical seal assembly through the shaft or sleeve, and the sealing material will be subjected to a certain pressure, thereby blocking the medium on the sealing surface to prevent leakage. At the same time, the spring and groove transmission parts of the mechanical seal can ensure the constant pressure on the sealing surface and automatically adjust it with the operation of the mechanical equipment, thereby ensuring the reliability of the seal. The choice of sealing material can also adapt to different working conditions. The temperature range can be from -70°C to 250°C, which is more suitable for various mechanical equipment.