The rotation speed sensor G-075-02-01 is a kind of precise measuring equipment, which is very common in various industrial applications, especially in the situation where accurate measurement of rotating speed is required. It has very high output signal stability, and can work stably in high temperature, high humidity, dusty, corrosive gas or liquid and other harsh environments. Therefore, it is applicable to heavy industry such as power plant and chemical industry.

The installation method of speed sensor G-075-02-01 usually includes the following steps:

1. 1. Before installation, ensure that the sensor is calibrated and meets the equipment specifications. Check the appearance of the sensor to ensure that there is no damage. Prepare tools required for installation and determine the installation position, which shall adapt to the working environment of the sensor and facilitate subsequent maintenance and inspection.
2. 2. Installation: According to the design of the sensor, fix it in the proper position of the rotating parts. Ensure proper clearance between the sensor and the gear under test to avoid direct contact and wear.
3. 3. Wiring: Connect the cable to the wiring terminal of the sensor according to the wiring diagram of the sensor. Ensure secure wiring and good contact. If the sensor has shielded wire, ensure the shielded wire is grounded to improve the anti-interference capability. Use appropriate cable protection measures, such as cable sleeves, junction boxes, etc., to protect the cables from the external environment.
4. 4. Test: After installation, power on and start the rotating parts to test whether the sensor can accurately measure the speed. The sensor position and clearance are adjusted until satisfactory measurements are obtained.

Points for attention for installating the speed sensor G-075-02-01 include:

• Installation position: It shall be installed at a proper position of rotating parts to ensure that there is proper clearance between the sensor and the gear to be measured so as to avoid damage due to contact. The specific size of the clearance shall be determined according to the actual working condition of the power plant or mechanical equipment.
• Cable protection: after wiring, check whether the cable and terminal are in good contact without short circuit. In addition, the signal connecting cable shall be protected according to the site environment, such as protective sleeve and sealing joint, to improve the durability and reliability of the cable.
• Power confirmation: confirm whether the working power supply of the sensor meets the specifications, whether the voltage and current are stable, and ensure that the power supply meets the requirements of the sensor.

Observe these installation and use precautions to ensure that the speed sensor G-075-02-01 can work accurately and stably and provide reliable speed signals for the industrial control system.

There are different types of sensors used for different steam turbine units. Check if it has the sensor you need, or contact us for more details.
Displacement Sensor (Lvdt) For Rsv HL-6-350-15
Eddy Current Proximity PR9376/010-011
Magnetic Pickup Speed Sensor SMCB-01-16
Vibration Sensor Cable CWY-DO-810800-50-03-01-01
Linear Position Sensor TDZ-1G-41
Linear Position Measurement TD-1-800
External Hydraulic Cylinder Position Sensor FRD.WJA2.601H
DEH OVERSPEED SENSOR D-080-02-01
Starting Valve Displacement Sensor DET700A
Linear Movement Sensor DET50A
Magnetic Linear Position Sensor HTD-100-3
Position Sensor Price B151.36.09.04.15
Pneumatic Cylinder With Position Feedback B151.36.09.04.10
Position Sensor Price TD1-100S
Industrial Proximity Sensor TM0180-A07-B00-C13-D10