The oil pump HSNH80Q-46NZ is used for the sealing oil system of the generator. When the oil pump is started, the exhaust valve installed on the outlet side of the system must be opened until the air on the suction side of the pump is completely discharged: if liquid emerges from it, the valve can be closed. This pump is self priming and can automatically exhaust without the need for backpressure.
During machine maintenance, it should be stopped. The operating procedures for machine shutdown specified in the manual must be followed. After the maintenance is completed, all safety and protective devices should be reinstalled immediately to restore their normal functions.
The rotation direction of the HSNH80Q-46NZ oil pump drive motor should be consistent with the arrow indication on the pump. The direction of rotation can be checked by opening the inlet and outlet valves and momentarily connecting the motor. If the direction of rotation is incorrect, the pump will not have suction, which will damage the pump components.
Yoyik provides original configuration accessories for power plants such as valves, vacuum oil tank accessories, AC sealing oil pumps, oil filters, differential pressure valves, generator sealing pads, float oil tank ball valves, etc. for sealing oil systems.
There are different types of screw oil pump used for generator sealing oil systems, such as:
Recirculating Oil Pump Driven Screw HSNH440-46NZ
Main Oil Pump Bearing HSNH280-43NZ
Air Side AC Sealing Oil Pump SNH280R54E6.7
Recirculating Oil Pump Bushing HSND280-46N
Electric Screw Pump NM045BY01L06B
Emergency Lube Oil Pump LDX36-95
Pump Coupling 3GR42*4A JB/T10886
Recirculating Oil Pump Mechanical Seal 3GR50*2 JB/T10886
Screw Pump Case HSNH-280-43NZ
Emergency Pump Oil Seal HSNH280-46NZ
Screw Pump For Sale HSNH280-54A
Main Oil Pump Bearing HSNH440-40Z
Hydrogen Side AC Oil Pump HSNS440-46
Machine Lubrication Pump LDX200-36J
Lubrication Pump Types LDX200-36Z
Post time: Jun-06-2023