DJY2612-115 electrode is a pressure type boiler water level gauge electrode rod, which uses high-purity alumina ceramic tubes as insulation material and is sealed with high-temperature corrosion-resistant expansion alloys through a special ceramic welding process at high temperatures. Due to the same expansion coefficient of alloys and alumina ceramics, it can determine the water level, and converts this data into electrical signals for use in monitoring and control systems. The product is mainly installed on the measuring cylinder of the liquid level gauge and the secondary display meter. It can be used for signal conversion to measure the high and low bubble water levels of heaters, deaerators, condensers, and boilers on high, medium, and low pressure boilers.

High precision measurement:

Press-in electrode rods usually have high measurement accuracy, which can accurately detect changes in water level and convert them into corresponding electrical signals.

High temperature resistance:

The working environment of boilers usually has high temperature conditions, so the pressed electrode rod needs to have high temperature resistance and be able to work reliably in high temperature environments.

Corrosion resistance:

Boiler water may contain corrosive substances, and good corrosion resistance can ensure the long-term stable operation of electrode rods.

Reliability:

The electrode rod needs to have stable and reliable performance to ensure accurate measurement and transmission of water level signals, in order to timely monitor and control the operating status of the boiler.

Safety:

Boilers are high-pressure equipment, so electrode rods need to comply with relevant safety standards to ensure that they do not cause danger or accidents during operation.

Besides of DJY2612-115 type, there are other types of level gauge electrode rods available:

Threaded electrode DJM1615-115
Threaded electrode DJM1615-87
Threaded electrode DJM1615-97
Threaded electrode DJM1815-115
Threaded electrode DJM1815-87
Threaded electrode DJM1815-97
Electric contact electrode DJM2015-115
Press-in electrode DJY1712-115
Press-in electrode DJY1712-87
Press-in electrode DJY1712-97
Press-in electrode DJY1812-115
Press-in electrode DJY2012-115
Press-in electrode DJY2012-87
Press-in electrode DJY2012-97
Press-in electrode DJY2212-115
Press-in electrode DJY2212-87
Press-in electrode DJY2212-97
Press-in electrode DJY2612-115