The working principle of the solenoid valve coil CCP230M is to generate magnetic force through electromagnetic induction, drive the valve core to move, and thus control the opening and closing of the valve. It is a simple and effective control method.

This type of solenoid valve is a spare part that often needs to be replaced during major repairs of steam turbines. If proper maintenance and upkeep are carried out during daily use, it can effectively extend its service life. Here are some maintenance suggestions for the solenoid valve CCP230M, hoping to be helpful to you.

1. 1. Regular cleaning: Keeping the coil CCP230M clean is the first step in maintenance. Regularly check the surface of the coil for dust, oil, or other dirt, which can be gently wiped clean with a clean cloth or soft brush.
2. 2. Prevention of moisture and corrosion: The plug-in solenoid valve coil CCP230M usually encounters damp environments, so it is necessary to pay attention to preventing moisture and corrosion. Ensure that the installation position of the coil is dry and avoid exposure to moisture or corrosive media.
3. 3. Check the connection: Regularly check the connection between the coil CCP230M and the solenoid valve to ensure that the connection is secure. If looseness or damage is found, tighten or replace the connecting parts in a timely manner.
4. 4. Regular inspection: Regularly inspect the appearance of coil CCP230M for wear, breakage, or other damage. If a problem is found with the coil, it should be repaired or replaced in a timely manner.
5. 5. Avoid overheating: The plug-in solenoid valve coil CCP230M will generate heat during operation, so it is necessary to ensure that there is sufficient heat dissipation space around the coil. Avoid excessive accumulation or covering of the coil to prevent overheating damage.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
Industrial Vacuum Pumps For Sale P-1836
Pump Shaft Seal Pvh098R01Aj30A250000001001Ab010A
Ball Valve Pd280/A
Universal Accumulator Charging Kit 6.3L Nbr 31.5Mpa
Engine Prelube Pump 70Ly-34X2-2
22Mm Double Check Valve 216C25
L.F Single Stream Metering Assy. (Valve) G761-3000B
Integrated Block 0508.919T0301.Aw001
Bladder Of High Pressure Accumulator Nxq-A-16/20-L-Y
Ion Exchanger Drain Valve Wj10F1.6Pa