The efficient operation of fire-resistant oil systems is the cornerstone for ensuring the safety and stability of facilities in industries such as power and petrochemicals. As the core component of this system, the fire-resistant oil-specific accumulator NXQ-AB-25/31.5-L-E, the careful selection of sealing kit materials during the design and manufacturing process, and the in-depth consideration of long-term performance, have undoubtedly become the key to ensuring the operating quality and life of the entire system.

As a component that directly contacts the accumulator with fire-resistant oil, the quality of the sealing kit directly determines the sealing effect, durability and convenience of maintenance of the equipment. In view of the special chemical properties and harsh working conditions of fire-resistant oil, especially phosphate-based hydraulic oil, the requirements for sealing materials far exceed general standards. This requires not only that the material has strong oil resistance, high temperature resistance, and chemical corrosion resistance, but also that it maintains stable mechanical properties and chemical stability during long-term use.

In this context, fluororubber (FKM) has become the first choice for sealing kit materials due to its excellent oil resistance, high temperature resistance and wide range of chemical resistance. Its chemical structure enables it to effectively prevent penetration and chemical erosion under long-term contact with fire-resistant oils, ensuring the long-term effectiveness of the seal. In addition, polytetrafluoroethylene (PTFE) reinforced composite materials also show their unique advantages in certain specific applications, especially their excellent wear resistance and low friction coefficient. When used with fire-resistant oils, they can significantly improve the reliability and life of dynamic seals.

Although ethylene propylene rubber (EPDM) may not be the first choice in applications with direct contact with fire-resistant oils, its good elasticity, weather resistance and resistance to hydrolysis in low temperature environments make it still valuable in auxiliary seals or under specific conditions. At the same time, the introduction of high-performance engineering plastics such as polyetheretherketone (PEEK), with its high strength, high heat resistance and excellent dimensional stability, provides solid structural support for sealing components and enhances overall durability.

In addition to the performance of the material itself, long-term performance considerations are equally important. This includes but is not limited to material aging and durability research. By simulating accelerated aging experiments under actual working conditions, the attenuation of sealing performance is controlled to the minimum in long-term use. Compatibility testing ensures that there will be no adverse chemical reactions between the material and the fire-resistant oil to avoid pollution or corrosion problems. The design pursues easy maintenance to reduce the time and cost required to replace seals. At the same time, through the dual optimization of materials and design, the maintenance cycle is extended as much as possible. In addition, with the increasing global attention to environmental protection, the recyclability and environmental impact of materials have also become important considerations. Environmentally friendly materials are selected to respond to the call for sustainable development.

Through in-depth analysis of the characteristics of each material, strict testing and verification, and careful planning of the overall design, it is ensured that this high-end accumulator can continue to play a role in a harsh industrial environment, contributing key forces to improving equipment performance, ensuring production safety, and promoting sustainable development.

Yoyik offers various types of valves and pumps and its spare parts for power plants:
Butterfly Valve BDB-150/80
stainless steel pressure regulating valve 977HP
oil lubricated vacuum pump WSRP-30
Bộ điều áp QAW4000
solenoid 22FDA-F5T-W110R-20/LP
gate globe check valves manufacturers WJ65F-1.6P-II
transfer pump system 150LY-23-1
PNEUMATIC ACTUATOR RP145DA
12 volt hydraulic valve CCP230M
single impeller centrifugal pump YCZ65-250A
Bộ điều áp AW20-N02H-CZ-B
Pump GM0170PQMNN
L-shaped joint 1/2 inch
2 stage gear pump GPA2-16-E-20-R6.3
solenoid valve J-110VDC-DN6-DOF
trip overspeed insertion element F3RG03D330
solenoid valve ac 220v CCP115D
solenoid valve 3D01A012
rotator gearbox M02225.OBMCC1D1.5A
Bearing assembly P8011D-00