page_banner

News

  • Precautions for Using OPC Solenoid Valve Z2804076

    The OPC solenoid valve Z2804076 is a normally closed solenoid valve used in the DEH monitoring and protection system of large steam turbine units. When using this type of OPC solenoid valve, the following precautions should be taken to ensure its normal operation and avoid safety accidents. The...
    Read more
  • Features of OPC Solenoid Valve AM-501-1-0149 for Steam Turbine

    The purpose of the steam turbine OPC control system is to prevent overspeed on the steam turbine generator set and help improve the stability of the power system. The solenoid valve AM-501-1-0149 is a commonly used solenoid valve in OPC systems. It has good sealing performance, long service life,...
    Read more
  • What Does the Float Valve BYF-40 Do for Generator Sealing Oil Tank?

    Floating ball valve BYF-40 is a fluid control valve commonly used in power plants to seal oil tanks. The valve is controlled to open and close by the buoyancy of the floating ball. It has the characteristics of simplicity, reliability, high sensitivity, strong corrosion resistance, and convenient...
    Read more
  • Difference Between Globe Throttle Check Valve LJC50-1.6P and Globe Valves

    The globe throttle check valve LJC50-1.6P is a spare part of the hydrogen cooling system of the generator in the thermal power plant. Its function is to control the cooling water flow of the generator and avoid water backflow, so as to prevent the generator set from being damaged by water hammer ...
    Read more
  • Attentions of Installing Bladder Accumulator NXQ-A-25/31.5

    A bladder type accumulator is a pressure vessel that needs to be installed according to specifications to avoid errors during installation and ensure optimal performance and safety during use. Yoyik often answers customers’ questions about the installation of NXQ series bladder accumulators...
    Read more
  • Why Does Stator Cooling Water Use the Centrifugal Pump YCZ50-250B?

    In the generator stator cooling system, the YCZ50-250C centrifugal pump is used to circulate the cooling water, taking away the heat generated during the operation of the generator stator winding, and maintaining the temperature of the stator winding within the allowable range. This pump adopts a...
    Read more
  • Common Failures of Jacking Oil Pump Suction Filter 707FM1641GA20DN50H1.5F1C

    The filter element 707FM1641GA20DN50H1.5F1C is an accessory of the steam turbine jacking oil pump suction filter. Its main function is to perform pre pump filtration to ensure that the jacking oil flowing into the pump is clean, and to avoid impurities from wearing the oil pump. Common faults of ...
    Read more
  • Solid Structure of Jacking Oil Pump Filter 707FH3260GA10DN40H7F3.5C

    The jacking oil pump filter element 707FH3260GA10DN40H7F3.5C is installed at the oil outlet of the jacking oil pump. The fluid pressure at this location is relatively high, which requires high impact resistance of the filter element. A good skeleton can provide strengthened support and protection...
    Read more
  • What Will Happen If We Use Cut Corners Actuator Filter AP1E102-01D10V/-W

    The actuator of steam turbine is a servomotor which provides power to the turbine control valve and the devices connected to it through the pressure difference of high-pressure EH oil. The oil quality in the actuator must be kept clean. The filter element AP1E102-01D10V/-W is a commonly used filt...
    Read more
  • How to Set the Diatomite Filter AZ3E303-02D01V/-W for Regeneration Device?

    The diatomite acid removal filter AZ3E303-02D01V/-W is used in the regeneration device of steam turbine EH oil to remove acidic substances and impurities in the oil. The setting conditions of the filter include the following: Filtration accuracy: The filtration accuracy of the diatomite filter e...
    Read more
  • How to Check the Authenticity of Regeneration Device Filter AZ3E303-01D01V/-W?

    Yoyik is a manufacturer of regeneration device filter element AZ3E303-01D01V/-W. Due to frequent user inquiries on how to determine whether the filter element is an imitation, we have summarized several points and suggest that you refer to: Brand channels: When purchasing filter cartridges, cho...
    Read more
  • Factors to Consider for Upgrading the Filter Element EH30.00.003

    The EH oil filter EH30.00.003 is a special filter element used in power plants to filter pollutants from the EH oil system of steam turbines. For power plant users, balancing the cost of filter with their effectiveness is equally important. Some users will focus on reducing costs when making deci...
    Read more