-
Introducing Six-Way Channel Switching Valve A-82.542.000
In industries such as petroleum, chemical, mining, and metallurgy, the six way directional valve A-82.542.000 is an important fluid directional device. This valve is installed in the pipeline for transporting lubricating oil in the thin oil lubrication system. By changing the relative position of...Read more -
Features of Direct Action Solenoid Valve ZS1DF02N1D16
The ZS1DF02N1D16 direct acting solenoid valve can work normally under vacuum, negative pressure, and zero pressure, without requiring the minimum pressure of the medium. It can start at zero pressure, so compared to the pilot type solenoid valve, the starting speed is faster, and is particularly ...Read more -
How Does The Main Lubricating Oil Pump 70LY-34X2-1B Work?
The lubricating oil main pump 70LY-34X2-1B is a cooling lubricating oil pump for the steam turbine main shaft, installed on the turbine rotor in the front bearing seat, directly driven by the turbine main shaft, and rigidly connected to the turbine main shaft. Due to the fact that this driving me...Read more -
Different Accumulators Used In Steam Turbine: NXQ-A-1.6/20-H-HT
In order to smoothly regulate the system pressure and store energy, both the high-pressure and low-pressure systems of the steam turbine are equipped with different accumulators. According to the pressure, flow, and regulation requirements of the steam turbine system, the distribution principle i...Read more -
Periodic Maintenance of Bladder Accumulator NXQ-A-16-20-F-Y
Regular maintenance of the steam turbine accumulator NXQ-A-16-20-F-Y can ensure its normal operation, safety, and reliability, reduce faults and downtime, and improve the production efficiency and economic benefits of the turbine unit. The main maintenance contents of Accumulator NXQ-A-16-20-F-Y...Read more -
Structure Design of Bladder Accumulator NXQ-A-/31.5-L-Y
The main function of the bladder type accumulator NXQ-A -/31.5-L-Y is to store capacity and replenish isolation fluid for the system. Its structure is mainly composed of a steel shell, an air valve, a capsule, and a liquid interface of a one-way valve. 1. Accumulator shell: It is a pressure vess...Read more -
Q&A: How to Remove Mushroom Valve of NXQ-AB-80/10-L Accumulator?
The installation and disassembly of NXQ series accumulators are relatively simple. But the actual situation varies from site to site, and various difficulties may be encountered during installation. For example, a user once asked Yoyik how to remove the one-way valve at the inlet of the accumulat...Read more -
Matters Needing Attention of Using Accumulator NXQ-A-25/31.5-L-EH-S
It is necessary to ensure that the accumulator NXQ-A-25/31.5-L-EH-S is used below the maximum operating pressure. When the usage pressure exceeds the maximum usage pressure value, it may cause damage to the product. Processing and modification are prohibited. Hot working (excluding connecting f...Read more -
Why Does Bellows Globe Valve KHWJ40F1.6 Have Good Sealing?
Bellows sealed globe valves are a type of valve with excellent sealing performance. The structural feature is a dual seal, which can perfectly isolate fluid and air, achieving zero leakage. The use of bellows sealed shut-off valves on pipelines is very common. Why does bellows globe valve KHWJ40...Read more -
Common Troubleshooting of Shut-off Solenoid Valve Q23JD-L10
The Q23JD-20 solenoid valve is a shut-off structure that can be manually reversed. It is suitable for various gas circuit systems to control the opening and closing of gases, including the opening and closing control of general corrosive gases. It has good corrosion resistance and good sealing pe...Read more -
OPC Solenoid Valve SV13-12V-O-0-00 Function Action Process
Generally speaking, the OPC overspeed protection system of steam turbines mainly refers to the OPC solenoid valve assembly. It is composed of two parallel arranged overspeed protection solenoid valve such as SV13-12V-O-0-00, two check valves, a control block, and related meters. These components...Read more -
How to Select 50-250C Generator Stator Cooling Water Pump
1. The basic data for the selection of stainless steel stator cooling water pump 50-250C is to first understand the specific medium of the liquid being transported, its characteristics, whether it is corrosive, restorative, flammable, explosive, toxic, etc., liquid temperature, whether it contain...Read more
/
