The oil seal TCM589332-OG is the guardian of the main oil pump of the steam turbine. It can prevent leakage and reduce wear. Today, let’s talk about the design of this oil seal and see how it achieves these two hard skills.

The TCM589332-OG oil seal is made of special rubber material. This material not only has excellent elasticity, can fit tightly to the pump shaft to form a good seal, but also has excellent wear resistance. Even under high-speed rotation and high-pressure environment, it can maintain good sealing performance and prevent leakage. More importantly, this material also has a certain self-lubricating property, which can reduce wear while maintaining the sealing effect.

The structural design of the oil seal is the key to preventing leakage and reducing wear. TCM589332-OG adopts a lip seal design, which is similar to a small lip edge that fits tightly on the pump shaft. The edge of the lip seal will form a thin oil film as the pump shaft rotates. This oil film is both a lubricant and a sealing layer, which can effectively isolate external impurities and internal oil to prevent leakage. At the same time, the adaptability of the lip seal enables it to automatically adjust the sealing pressure with the slight vibration and temperature change of the pump shaft, reduce wear and extend service life.

In order to ensure that the oil seal can maintain good sealing performance under various working conditions, the TCM589332-OG oil seal has a built-in spring loading mechanism. This spring can provide continuous pressure to the lip seal, and even when the pump shaft rotates at high speed or is subjected to external impact, it can also maintain the close contact between the lip seal and the pump shaft to prevent leakage caused by insufficient pressure. At the same time, spring loading can also help the lip seal better adapt to the slight vibration of the pump shaft and reduce wear caused by poor contact.

The dimensional accuracy of the oil seal is an important factor in determining its sealing effect and service life. When designing the TCM589332-OG oil seal, the matching tolerance with the pump shaft was fully considered to ensure that the oil seal and the pump shaft can form a perfect fit during installation, neither too tight to cause additional wear nor too loose to cause leakage. This micron-level dimensional control is the key to the oil seal maintaining sealing performance for a long time and reducing wear.

In addition to the exquisite design, proper maintenance and care are also important factors for the TCM589332-OG oil seal to maintain sealing performance and reduce wear for a long time. During installation, the pump shaft and the oil seal installation surface should be kept clean to avoid impurities from entering and causing wear. During operation, the sealing condition of the oil seal should be checked regularly, and if abnormalities are found, it should be replaced in time to avoid leakage expansion. At the same time, the lubrication condition of the pump shaft should be checked regularly to ensure sufficient lubrication and reduce the wear of the oil seal.
Yoyik offers various types of valves and pumps and its spare parts for power plants:
Solenoid valve coil J-220VDC-DN6-D/20B/2A
Oil Seal HPT-300-340-6S/27/PCS1002002380010-01/420.01/2-204221688
Globe valve WJ20N4.0P
servo control valve G761-3033B
SEAL OIL SYSTEM Vacuum pump WS30
turbine Auxiliary AC oil pump 125LY23-4
sealing oil tank float valve core BYF-80
Jacking Oil Pump AA10VS045DFR1/31R-VPA12N00/
globe control valve price WJ65F-1.6P-II
Overspeed protection control valve 165.31.56.03.01
Bellows valves HWJ10F-1.6P
Medium pressure shut-off valve WJ20F3.2P
mechanical Shutoff valve F3RG03D330
Accumulator NXQAB-40/31.5-L-A
sealing oil screw pump HSNS210-54NZ
Solenoid valve+coil J-220VDC-DN6-U/15/31C
Solenoid valve+coil SR04GB32046B4
2 way globe valve 100FWJ1.6P
servo valve D062-512F
EH oil pump relief valve DB15G-2-L5X/5/2