The turbine rotational speed sensor CS-1-G-100-05-01 plays a vital role in the power plant. It provides real-time data support for the stable operation of the equipment by accurately measuring the speed of the turbine. However, in order to ensure that the sensor can work for a long time and accurately, we must pay attention to the following points during use to avoid sensor failure.

1. Choose a suitable installation location

First of all, the installation location of the rotation speed sensor CS-1-G-100-05-01 is crucial. It should be installed in a suitable position of the turbine to ensure that the speed information of the gear or rotor can be accurately captured. At the same time, during installation, the sensor should be avoided from being exposed to harsh environments such as high temperature, high humidity, and corrosive gases to reduce the impact of environmental factors on the sensor. During the installation process, it is also necessary to ensure that the relative position of the sensor and the rotating body to be measured is correct to avoid measurement errors caused by improper installation.

2. Keep the electrical connection stable

The electrical connection of the speed sensor is also one of the key factors affecting its working stability. During installation, ensure that the cable is well connected to avoid loosening or breaking. At the same time, it is also necessary to regularly check the insulation performance and connection status of the cable to ensure that it can transmit signals normally. If the cable is found to be damaged or aged, it should be replaced in time to avoid electrical failure.

3. Regular calibration and maintenance

In order to ensure the measurement accuracy of the speed sensor CS-1-G-100-05-01, we need to calibrate and maintain it regularly. The calibration process can be achieved by comparing with the standard speed source to check whether the measurement error of the sensor is within the allowable range. If the measurement error is found to exceed the specified value, the sensor parameters should be adjusted in time or a new sensor should be replaced. In addition, the sensor needs to be cleaned and maintained regularly to remove impurities such as dust and oil on the surface to keep it in good working condition.

4. Avoid magnetic field interference

Since the working principle of the turbine speed sensor CS-1-G-100-05-01 is based on electromagnetic induction, it may be interfered by strong magnetic fields or electromagnetic waves around it. During installation and use, we need to try to avoid exposing the sensor to a strong magnetic field environment to reduce the impact of magnetic field interference on measurement accuracy. If magnetic field interference cannot be avoided, measures such as shielded cables or adding filters can be considered to reduce interference.

5. Pay attention to changes in the object being measured

During use, we also need to pay attention to changes in the material, size and shape of the rotating body being measured. If the gears or rotors of the steam turbine are worn or deformed, the sensor CS-1-G-100-05-01 may not be able to accurately measure its speed. Therefore, we need to regularly inspect and maintain the gears and rotors of the steam turbine to ensure that they are in good working condition.

6. Monitor the working status of the sensor

Finally, we also need to monitor the working status of the sensor to detect potential problems in a timely manner. We can judge whether the sensor is in normal working condition by observing the output signal, measurement error and other indicators of the sensor. If abnormal phenomena are found in the sensor, such as unstable output signal, increased measurement error, etc., they should be checked and handled in time to avoid equipment failure or safety accidents caused by sensor failure.

When looking for high-quality, reliable steam turbine speed sensors, YOYIK is undoubtedly a choice worth considering. The company specializes in providing a variety of power equipment including steam turbine accessories, and has won wide acclaim for its high-quality products and services. For more information or inquiries, please contact the customer service below:

E-mail: sales@yoyik.com
Tel: +86-838-2226655
Whatsapp: +86-13618105229