Room temperature adhesive HDJ-16B is a two component room temperature curing coating adhesive mainly composed of epoxy resin and curing agent and its organic volatile content meets the standards specified by China’s Environmental Protection Bureau. This adhesive is suitable for fixing the end of the generator stator winding, such as binding the winding end, coating the connecting wire insulation, and impregnating polyester felt. It has excellent mechanical and electrical properties and high bonding strength. When room temperature adhesive HDJ-16B, please pay attention to the following points:

1. Storage conditions: Sealed and stored at room temperature, avoiding direct sunlight and high temperature and humidity environments. The storage temperature should be between 5 ℃ and 40 ℃, and should not be stored in an environment below 0 ℃ or above 40 ℃.

2. Mixing ratio: Before use, please mix components A and B according to the ratio specified in the product manual to ensure uniform mixing. Avoid contact with pollutants such as water and oil during the mixing process to avoid affecting the performance of the adhesive.

3. Mixing time: During the mixing process, please stir thoroughly to ensure that the adhesive has good fluidity and uniformity. It is recommended to control the mixing time within 2-3 minutes to avoid sedimentation, solidification, and other phenomena of the adhesive during use.

4. Construction environment: Please carry out painting operations in a well-ventilated environment to avoid inhaling excessive organic volatiles. During construction, please wear protective glasses, masks, and gloves to prevent harm to the human body.

5. Brushing method: When brushing, ensure that the coating is uniform and avoid being too thick or too thin. The number of coats can be adjusted according to actual needs. It is generally recommended to apply 2-3 coats, and each coat should wait for the previous coat to dry before proceeding.

6. Curing time: After painting, please cure according to the curing time specified in the product manual. During the curing process, please ensure that the adhesive is not affected by external interference and remains clean and dry.

7. Post curing treatment: After the room temperature adhesive HDJ-16B is completely cured, subsequent processing can be carried out. The cured adhesive layer has a certain degree of elasticity and can withstand a certain degree of deformation. But within 24 hours, please try to avoid applying too much external force to the adhesive layer to avoid affecting its performance.

8. Safety protection: If you accidentally come into contact with glue during use, please immediately rinse with plenty of water and seek professional guidance. If allergic reactions occur, seek medical attention immediately.

Please follow the above precautions to ensure the best performance of room temperature adhesive HDJ-16B. If you have any questions or needs during the use of HDJ-16B room temperature coating adhesive, please feel free to contact us. We will wholeheartedly provide you with professional technical support and after-sales service.