The solenoid directional valve FRD.WJA3.001 plays a core role in the steam turbine EH oil system with its unique sliding cylindrical valve core design and efficient electromagnetic drive mechanism. This valve uses electromagnetic force to push the steel ball to achieve precise control and switching of the oil circuit, which is crucial to the stable operation of the system. However, due to the particularity of its working environment and continuous mechanical movement, the electromagnetic reversing valve faces the risk of jamming, which will not only affect the efficiency of the system, but may also cause safety issues in severe cases. Therefore, it is particularly critical to adopt effective preventive measures and maintenance strategies.

Importance of maintenance and cleaning

Regular maintenance and cleaning are the first line of defense against jamming. Particulate impurities in the anti-fuel system are the main cause of obstruction of the movement of the valve core or steel ball. It is recommended to implement strict oil line filtration procedures to ensure the cleanliness of the oil. In addition, regular disassembly of the solenoid valve FRD.WJA3.001 for deep cleaning of the internal components, carefully removing any impurities that may have accumulated, and inspecting components for wear or damage is an important part of the maintenance plan.

Select and maintain oil

The quality of oil directly affects the working status of the solenoid reversing valve. Selecting high-quality anti-fuel oil that meets industry standards and regularly testing changes in various indicators (such as acid value, moisture content) are effective ways to prevent oil line blockage and valve body jamming. Once the test results show that the oil has deteriorated, it should be replaced immediately to avoid potential damage to the system.

Precise control of electromagnetic forces

Proper regulation of electromagnetic force is the key to ensuring smooth movement of the FRD.WJA3.001 valve body. Properly adjust the power supply voltage of the solenoid coil to ensure sufficient thrust to drive the valve core and to avoid premature aging of the coil caused by overload. At the same time, ensure the matching between the electromagnet and the valve core to avoid jamming caused by mismatch between thrust and resistance.

Management of environmental factors

The working environment of the solenoid reversing valve cannot be ignored either. Maintain appropriate temperature conditions to avoid the impact of extreme temperatures on electromagnet performance and oil fluidity. At the same time, taking necessary moisture-proof and dust-proof measures to protect the solenoid valve FRD.WJA3.001 from the negative impact of environmental factors is an indispensable part of preventing jamming.

Regular inspection and replacement of wearing parts

Regular inspection and timely replacement of vulnerable parts such as seals is also an important part of the maintenance plan. The integrity of sealing rings, gaskets, etc. directly affects the sealing performance of the FRD.WJA3.001 valve body. Any slight damage may cause leakage or jamming. In addition, the insulation performance check of the electromagnetic coil cannot be ignored to ensure that it can still work stably under long-term operation.

The strategy to prevent the solenoid reversing valve FRD.WJA3.001 from jamming involves many considerations, including but not limited to strict maintenance and cleaning system, strict control of oil quality, fine adjustment of electromagnetic force, and environmental conditions. optimization and timely replacement of wearing parts. Through the implementation of this series of comprehensive measures, the operating reliability of the electromagnetic reversing valve can be significantly improved, thereby ensuring the efficient, stable and safe operation of the entire steam turbine fuel-resistant system.

Yoyik can offer many spare parts for power plants as below:
RUBBER BLADDER NXQA-10/31.5-L-EH
vacuum pump 30WSRP
Moog servo valve G771K201
single-stage water centrifugal pump KSB50-250
Cooling fan YE2-80M1-6
Bộ điều áp AW40-F04G-A
Accumulator bladder NXQA-10/20-L-EH
RUBBER BLADDER NXQA-25/31.5-L-EH
Bộ điều áp QAW4000
Solenoid valve 24102-12-4R-B12, I-24-DC-16
Reduction gearbox M02225.OBGCC1D1.5A
makeup water solenoid valve K25FJ-1.6PA2
vacuum pump bearing ER207-20
Pressure Switch T424T10030XBXFS350/525F
solenoid valve J-220VDC-DN6-Y/20E/2AL
globe valve 40FWJ1.6P
oil seals 32 x 37 x 2.5 mm Thk
Rubber Bladder for ST CWP Accumulator NXQ-A-10/31.5-L-Y
SOLENOID COIL MFJ1-4