Primary fan is mainly used in thermal power plants. They deliver air into the combustion chamber or furnace to support the combustion process of the fuel. Primary air usually also carries coal powder from the pulverizer into the combustion area, so it is essential to maintain combustion efficiency.

Speaking of the primary fan connecting rod GU23434-11, its main functions are connection and transmission. Connection means that it connects the crankshaft and piston of the fan to ensure that the movement between the two can be transmitted smoothly. Transmission means that it can convert the rotational motion of the crankshaft into the linear reciprocating motion of the piston, which is the basis for the operation of the fan.

The structure of the GU23434-11 connecting rod is relatively simple, but very important. It usually consists of two parts, a small head and a large head. The small head is connected to the piston through a pin, and the large head is connected to the crankshaft through a bearing. This structural design enables the connecting rod to drive the piston to reciprocate under the drive of the crankshaft.

The GU23434-11 connecting rod has a direct impact on the operation of the fan. First of all, the connection quality of the connecting rod directly affects the smoothness of the fan operation. If the connection between the connecting rod and the piston or crankshaft is loose, it will cause the fan vibration to intensify and affect the stable operation of the fan. Secondly, the transmission efficiency of the connecting rod determines the energy conversion efficiency of the fan. An efficient connecting rod can transfer the power of the crankshaft to the piston more effectively, reduce energy loss, and improve the overall efficiency of the fan.

In extreme cases, the failure of the connecting rod may cause serious safety accidents, such as parts flying out or breaking, so it is necessary to ensure that it is in good working condition. Therefore, the connecting rod needs to be inspected and maintained regularly to ensure its normal operation. If there is a problem with the connecting rod and it is not handled in time, it may cause a larger failure and increase the maintenance cost.

In summary, although the connecting rod GU23434-11 is only a small component in the fan, it is essential for the normal operation of the fan. In order to ensure the efficient and stable operation of the fan, the connecting rod needs to be inspected and maintained regularly and ensured to be properly installed and adjusted.

Yoyik offers various types of spare parts for power plant main turbine, generator and auxiliary equipment:
Base plate assembly Generator QFS-50-2
guide vane HPT300-340-04-11(12)(14)
Spring (steam end) Generator QFQ-50-2
Carbon crystal sealing ring HU24640-22G
Induced draft fan core shaft HU25242-221
SEAL,STEAM,2ND DIAPHRGM,BFPT 18Cr2MnMoB Steam Turbine Intermediate pressure steam inlet chamber
Sealing plate Generator TQN-100-2
SEAL SET FOR CYLINDER BLOCK OF HPCV ACTUATOR ASSEMBLY 20Cr1Mo1VNbTiB Steam Turbine LP MSV
ring DTYD30UZ011
Seal ring 1616 183 3100
LP end seal 34CrMo Steam Turbine LP main steam valve
Impeller key DG600-240-03-13
Faceted hexagon socket head bolt in low pressure partition 2Cr12NiMoWV Steam Turbine LP casing
Generator outlet cover manhole gasket Generator QFSN-300-2-20B
IDLER WHEEL 0Cr17Ni4Cu4Nb Steam Turbine nozzle chamber
HP MSCV isolation sleeve 18Cr2MnMoB Steam Turbine Steam chamber
Seal sleeve DG600-240-03-07
Standard spring washer 35CrMoA Steam Turbine nozzle chamber
sealing ring DG600-240-03-15
Stop washer 20Cr1Mo1VNbTiB Steam Turbine Combined Intermediate Valve