When performing the replacement of the stator cooling water filter element SG-65/0.7, ensuring the safety and environmental protection of the operation process is the primary principle. This is not only related to the health and safety of the operator, but also a manifestation of responsibility for the surrounding environment. The following is a set of operating recommendations that combine safety regulations and environmental protection measures, with special emphasis on the precautions when handling waste filter elements.

First of all, all personnel involved in the replacement of the filter element must have the corresponding operating authorization and receive comprehensive safety training. When working, wear complete personal protective equipment, including hard hats, protective glasses, protective gloves, dust masks and anti-static clothing to prevent accidental injuries and potential exposure to chemicals.

Before officially starting to replace the filter element, be sure to ensure that the relevant equipment is completely powered off and perform the lock-out identification procedure to prevent accidental restart. Next, completely drain the cooling water in the system through the drain valve, confirm that there is no residual pressure in the system, and avoid the risk of scalding caused by hot water or steam leakage. Use appropriate tools and equipment for operation to prevent damage to the filter element or adjacent components.

Environmental monitoring is also indispensable, especially when working in closed or confined spaces. Gas detectors should be deployed to monitor the concentration of harmful gases at all times to ensure a safe working environment.

In terms of environmental protection, the handling of waste filter elements requires extra caution. The replaced filter elements should be carefully collected and classified by material (such as paper, fiberglass or polypropylene), and sealed with leak-proof packaging materials to prevent the leakage of pollutants. Subsequently, according to local environmental protection regulations, qualified waste treatment agencies are entrusted to carry out legal recycling or harmless treatment. Illegal dumping is strictly prohibited.

When handling waste filter elements, be careful to avoid direct skin contact to prevent infection by harmful substances or microorganisms. During the entire handling and storage process, ensure that sealing measures are in place to prevent pollutants from leaking and causing secondary pollution. In addition, a detailed record system is established to record the type, quantity and final disposal of waste filter elements in detail for traceability review.

We believe that the replacement of stator cooling water filter element SG-65/0.7 is a comprehensive task involving safety and environmental protection. By strictly complying with the above procedures and measures, not only can the safety of operators be guaranteed, but also the impact on the environment can be minimized.

Yoyik supply multiple types of filters used in steam turbine and generator system:
pressure filter element AP3E302-02D01V/-F EH oil filter element controlling valve Stop BFPT
return line filter in hydraulic system DP201EA03/-W Filter for EH oil station
champion oil filters WU-100×100-J BFP filter
air filter mobil HQ25.600.12Z inlet filter
hydraulic oil filtration machine KTX-80 Fuel oil filter
10 micron hydraulic oil filter DP1A601EA03V/-W EH oil system oil feeder manifold outlet filter
hydraulic filter maintenance quizlet DQ6803GA20H1.5C auto back-flushing filter
swift oil filter price HQ25.600.18Z regeneration diatomite filter
hydraulic filter tractor supply SFX-660*30 FILTER CORE
duplex filter element C9209014 Hydraulic Oil Suction Filter
filter lube oil 30-400-205 oil filter separation filter
100 micron stainless steel filter DP2B01EA10V/W FILTER FOR CONTROL VALVE
hydraulic filter usage SFX-110X80 precision filter
find my oil filter DQ8302GA103H.5C Hydraulic oil filter cartridge
turbine oil purification system DQ600EG03HC oil-return filter
fiberglass filter element DS103EA100V/W Filter element at inlet of heating pump
5 micron hydraulic filter HQ25.200.11Z-1 diatomite filter
oil and filter specials AX1E101-02D10V/-W EH pump working filter
stainless steel filter cartridge HBX-250*10 Jacking oil filter
100 micron stainless steel filter DP201EA03V/-W EH actuator filter