The rotation speed sensor 143.35.19 is a high-performance speed measuring instrument with a wide speed measurement range, excellent temperature adaptability and strong vibration resistance. It senses the concave and convex grooves on the magnetic conductor and gives the corresponding high and low levels to detect the speed and linear speed of the wheel shaft. After calculation and processing, the user can get the acceleration of the measured object, which is of great significance in the operation monitoring and fault diagnosis of rotating machinery.

Product Features

1. Wide frequency response: The low frequency response of the speed sensor 143.35.19 can reach 0Hz, which is suitable for zero speed measurement of rotating machinery, while its high frequency response is as high as 5kHz, which meets the high speed measurement requirements of most industrial fields.

2. Forward and reverse discrimination: Since the sensor can give two speed signals with a certain phase difference, it can accurately distinguish the forward and reverse rotation of the measured object.

3. Strong vibration resistance: The speed sensor 143.35.19 has strong vibration resistance and can work stably in a strong mechanical vibration environment.

4. Wide temperature adaptability range: The sensor has a wide temperature adaptability range and can maintain stable performance in extreme temperature environments.

Application range

The speed sensor 143.35.19 is widely used in various industrial fields, such as energy, chemical industry, steel, papermaking, etc. It can help users realize real-time monitoring and fault diagnosis of the operating status of rotating machinery, such as fans, pumps, compressors, motors, etc. Through accurate measurement and analysis of its speed, linear speed and acceleration, users can better understand and control the operating status of the equipment and improve equipment efficiency and safety. At the same time, for some equipment that requires precise speed control, the sensor can also provide accurate speed feedback and control signals.

The speed sensor 143.35.19 has the following main steps when installing:

1. Determine the installation position: Select a suitable installation position according to the specific measurement requirements and the type of sensor. It is generally recommended to install it on the bearing seat closer to the rotor.

2. Preparation: Clean the installation position, check whether the installation hole meets the specification requirements, and ensure that the installation position is flat and free of debris, so as to ensure that the sensor is perpendicular to the axis.

3. Install the sensor: Install the sensor at the predetermined position through a flange or other fixing method, and pay attention to adjusting the gap to ensure that there is an appropriate distance between the sensor and the rotating part.

4. Connect the signal line: Connect the sensor’s signal line to the input port of the data acquisition device or controller, and pay attention to the correct wiring.

5. Debugging: After installation, calibrate and debug the sensor to ensure that the sensor output is accurate and reliable.

Yoyik can offer many spare parts for power plants as below:
temposonics transducer 4000TDG
FAN, SUB OM-94028
Sensor Temperature Sparepart WSSX-411
Governor Cabinet Frequency Meter SFB-4003
Sensor 450DR-2244-0100
Heat Expansion Transducer DT-2
Turbin Expansion Sensor TD-2-25
DISPLAY INTEGRATOR WTA-75
optical linear position sensor 3000TDZ-A
Travel sensor FRD.WJA2.601
Pneumatic Positioner F001798154
Inverter AAD03020DKT01
Dual Vibration monitor HY-3VH
Bimetal temperature measurement of Generator WSSX-401
Armored Double Channel Pt-100 UHZ-51
Braun Card D421.51U2
Module Vibration HY-5V
Speed sensor SPSR.1 (Ф16x92mm)
Soft start JJR5000-350-380-C
Liquid LevelTransmitter with sensor GB-2100C