The turbine speed sensor DF6202-005-05-04-00-10-000 is a sensor used to measure the turbine speed. It adopts sensing technology to detect the rotating speed by sensing the change of magnetic field on the rotor. As the operating environment of steam turbine is generally harsh, including high temperature and high pressure, DF6202-005-04-00-10-000 sensor has strong environmental adaptability, such as high temperature resistance and corrosion resistance, so as to ensure that the sensor can work stably and provide accurate speed data.

For steam turbines, the accuracy and reliability of sensors is critical to the stability and safe operation of the entire system. When selecting and installing sensors, it is necessary to ensure their matching with the steam turbine, including the installation position, installation method and wiring, etc., which shall be carried out in strict accordance with the manufacturer’s instructions to ensure the accuracy of the measurement and the safe operation of the equipment.

Pay attention to the following mistakes during the use of the speed sensor DF6202-005-04-00-10-000 to avoid possible losses:

1. Neglecting the impact of environmental factors on the sensor, install the sensor in an inappropriate environment.
2. Failure to install and wire in accordance with the instructions results in the sensor not working properly.
3. Long-time overload operation causes damage to the sensor.
4. Poor sensor performance due to lack of regular maintenance and calibration.

If the DF6202-005-04-04-00-10-000 sensor cannot accurately measure the turbine speed, it may cause damage to other parts or systems of the turbine. As the steam turbine is a high-speed rotating mechanical system, accurate control of rotating speed is essential for stable operation of the whole steam turbine. If the sensor measurement is inaccurate or faulty, it may cause the following problems:

• Control system failure: the rotating speed and load of the steam turbine are usually controlled by the control system. If the sensor is faulty, the control system may receive the wrong speed signal, which causes the control system to lose effective control of the steam turbine, and may cause overspeed or insufficient load of the steam turbine.
• Safety risk: exceeding the rated speed of the steam turbine may pose a threat to the system safety, which may lead to overload of mechanical parts, damage of bearings and other key components, even unstable operation or shutdown of the steam turbine, and failure of other equipment or systems.
• Efficiency reduction: Inaccurate speed measurement caused by sensor failure may reduce turbine efficiency and waste energy.

There are different types of sensors used for different steam turbine units. Check if it has the item you need, or contact us for more details.
Industrial Proximity Sensor CWY 5M
Linear Differential Sensor Của Van MSV C9231114
Smoke Fan Speed Sensor DF6101-005-065-01-05-00-00
Speed Probe CS-3F-M10-L55-1
SENSOR LVDT FOR IV (Intercept Valve) TDZ-1-25
Sensor Eddy Current WT0182-A50-B00-C00
SENSOR SPEED (RPM) FOR TURBINE ZS-04-75-3000-20
Types Of Lvdt 6000TDG-15-01-01 0-300mm
Heat Exapansion Sensor TD-2
Position Transmitter TDZ-1-24
Linear Displacement Transducer For STG TDZ-1D-04
Lvdt Cost DET-600A
Eddy Current Transducer CWY-DO-813504
Hall Effect Linear Position Sensor 191.36.09.03 ±50.8mm
Sensor Position LVDT LP Bypass DET-200A
VALVE POSITION TRANSDUCER ZDET1000B
Shaft Displacement Probe C9231125