As an important component for maintaining the vacuum degree of the sealing oil system, the performance of the vacuum pump KZ100-WS directly affects the quality of the sealing oil and the operating status of the generator. As the core maintenance component of the vacuum pump, the sealing kit is essential for maintaining the sealing of the pump and extending its service life.

The sealing kit usually contains multiple key components required for the operation of the vacuum pump KZ100-WS, each of which has its specific function. During use, the following signs may indicate that the sealing kit needs to be inspected or replaced:

Intensified vibration of the pump body: This may be caused by bearing wear or imbalance, and the corresponding parts need to be inspected and replaced.

Abnormal increase in pump oil consumption: This usually indicates that the oil seal or other seals have failed, resulting in pump oil leakage.

Increased noise during pump operation: It may be that internal components such as blades, carbon sheets or bearings are damaged, and need to be disassembled for inspection.

Decreased pump efficiency: manifested as a slowdown in the pumping rate and the ultimate vacuum degree does not meet the design requirements. This may be due to wear or damage to a component in the sealing kit.

Abnormal increase in pump temperature: Failure of the cooling fan or blockage of the oil circuit may cause the pump temperature to be too high, and the cooling system and oil circuit need to be checked.

The seal kit of the seal oil system vacuum pump KZ100-WS consists of a series of key components, which work together to ensure the efficient operation of the pump. Regular inspection and timely replacement of worn seal kit parts are important measures to maintain pump performance and extend its service life. By monitoring pump vibration, pump oil consumption, exhaust conditions, operating noise, efficiency changes and pump temperature, problems with the seal kit can be discovered in time, and corresponding maintenance actions can be taken to ensure the stable operation of the seal oil system and the entire generator set.
Yoyik offers various types of valves and pumps and its spare parts for power plants:
installing shut off valve WJ15F-16P
Cooling fan YE2-80M1-6
MSV actuator test solenoid valve 22FDA-F5T-W220R-20/LP
vacuum pump impeller P-2332
Servo valve 072-2623
220v solenoid coil GS061600V
nozzle flapper servo valve 072-1202-10
Bellows valves HWJ10F-1.6P
Electromagnetic coil 3YV
trip solenoid F3DG5S2-062A-220AC-50-DFZK-V/B08
RUBBER BLADDER NXQ-A-16L/20F-Y
reciprocating piston pump PVH074R01AB10A250000002001AE010A
Overflow valve for the EH regulatory system 98H
control valve GS021600V
shut off valve stem WJ32F-1.6P
ACTUATOR PNEUMATIC DOME VALVE P22457E-00
globe control valve price Q23JD-L10
high pressure globe valve KHWJ40F1.6P DN32 PN16
needle valve supplier SHV4
Guide vane bushing PCS1002002380010-01/541.01