The servo valve PSSV-890-DF0056A is a valve used in the regulation and security system of power plants. It ensures the safe and efficient operation of the steam turbine system by controlling parameters such as position, flow rate, and pressure, and provides fault protection and status monitoring functions.

The servo valve PSSV-890-DF0056A achieves automatic monitoring and control of the steam turbine through connection and communication with the automation monitoring and control system of the power plant. Such automated monitoring and control systems can improve the operational efficiency, safety, and reliability of power plants, while reducing the need for manual operation and intervention.

1. 1. Connection and communication: The servo valve will be connected to the monitoring and control system of the power plant through electrical or electronic interfaces. This can be achieved by using standard electrical interfaces such as cables or bus systems (such as Profibus, Modbus, etc.) to communicate with the control system.
2. 2. Signal transmission: The electro-hydraulic servo valve receives commands or signals from the monitoring and control system and converts them into corresponding control actions. These signals can include switch signals, analog signals, or digital signals used to control parameters such as valve position, flow rate, or pressure.
3. 3. Control Algorithm: The servo valve PSSV-890-DF0056A contains a control algorithm internally, which is used to calculate and control the valve’s action based on the received signal and system requirements. These algorithms can be adjusted and optimized as needed to achieve accurate control and response.
4. 4. Feedback mechanism: In order to achieve closed-loop control, servo valve PSSV-890-DF0056A is equipped with a feedback mechanism for monitoring and feedback of actual values of valve position, flow rate, or pressure parameters. This can be achieved through sensors or built-in measuring devices, transmitting feedback signals back to the monitoring and control system for precise control and adjustment.
5. 5. Monitoring and Diagnosis: The servo valve PSSV-890-DF0056A can also provide monitoring and diagnostic functions for real-time monitoring of valve status, performance, and health status. This information can be collected and analyzed through monitoring and control systems to achieve fault detection, early warning, and maintenance plan development.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
Vacuum Pump Valve Plate 30-Ws
Solenoid Valve Electric Ccs230D
Solenoid Valve Normally Open 220V Pd10-40-0-N-170
Hydraulic Accumulator Nitrogen Nxq A-25/31.5-L-Eh-S
Accumulator Charging Nxqab-100/-10-L
Solenoid Coil Sv13-12V-O-0-00
Centrifugal High Pressure Water Pump Dfb125-80-260
Solenoid Valve Dea-Pcv-03/0560
Ac Solenoid 300Aa00126A
High Pressure Reciprocating Plunger Pump Pvh074R01Ab10A250000002001Ab010A