In modern industrial production, the application of sealant is very extensive, especially in flat sealing of steam, water, and oil for generators, coolers, and various flanges. Among them, slot Sealant SWG-1 has become the preferred choice in many industrial fields due to its excellent performance and wide application range.

Slot Sealant SWG-1 is a single component synthetic rubber that is free of dust, metal particles, and other impurities, allowing it to perform excellent sealing effects in various application scenarios. Whether it is a 1000MW unit, a 600MW unit, or a 300MW unit, SWG-1 can provide stable sealing performance to ensure the normal operation of the equipment.

Before using slot Sealant SWG-1, there are several steps that must be done. Firstly, it is necessary to use sand cloth to remove the rust from the sealing joint surface on both sides, clean the end cover, and keep it dry. This step is very important because both rust and dirt can affect the bonding effect of the sealant. Secondly, remove burrs to ensure the smoothness of the confidential cover. Finally, use a cotton cloth dipped in a little acetone to remove oil stains. After these preparations are completed, the bonding can proceed.

Of course, safety is also very important when using slot Sealant SWG-1. Therefore, necessary personal protective equipment such as rubber gloves and masks should be worn when using to prevent direct contact with skin, eyes, etc. In addition, good ventilation should be maintained on the site of use, and fireworks are strictly prohibited to ensure the safety of the working environment.

The shelf life of slot Sealant SWG-1 is 24 months, and its performance can be maintained as long as it is stored at room temperature. However, it should be noted that once opened, the shelf life of the sealant will be shortened. Therefore, when using it, it is advisable to take as much as possible to avoid waste.

Overall, slot Sealant SWG-1 has become an ideal choice for sealing hydrogen grooves on generator end caps, coolers, and flat seals for steam, water, and oil in various flanges due to its excellent performance, wide application range, and simple usage. As long as used correctly, it can ensure the normal operation of the equipment and extend its service life.