For the sootblowing system of the power plant, the pneumatic angle valve A2889B controls the flow of the sootblowing gas, ensuring that the inside of the boiler is clean and tidy and improving the combustion efficiency. Today, let’s take a look at how it does all this.

In the boiler of the power plant, fuel combustion will produce a lot of ash and smoke. If these impurities are not cleaned in time, they will be deposited on the heat exchange surface, seriously affecting the heat exchange efficiency, and even blocking the pipeline, causing safety problems. The sootblowing system was born for this purpose. By spraying high-pressure gas, these accumulated ash can be removed, the heat exchange surface can be kept clean, and the efficient operation of the boiler can be ensured.

In the sootblowing system, the pneumatic angle valve A2889B is like a flow dispatcher. Its task is to accurately control the flow and pressure of the sootblowing gas according to the requirements of the sootblowing procedure. A2889B adjusts the flow area of ​​the gas by adjusting the opening of the valve port, thereby controlling the flow rate. This sounds simple, but in actual operation, the requirements for accuracy are extremely high, because if the flow rate is too large, gas will be wasted, and if the flow rate is too small, the cleaning effect cannot be achieved.

The pneumatic angle valve A2889B adopts a right-angle design. After the gas enters, it flows to the outlet along a 90-degree bend. This design can reduce fluid resistance and improve efficiency. An adjustable valve disc is installed in the valve body, which is controlled by an external pneumatic actuator to open and close the valve disc. When receiving a signal from the control system, the pneumatic actuator will drive the valve disc to adjust the size of the valve port to control the gas flow. This design can ensure both fast response and fine adjustment.

The A2889B pneumatic angle valve does not exist in isolation. It is closely connected with the control system of the entire sootblowing system. The control system calculates the optimal gas flow and pressure required for each sootblowing point according to the preset sootblowing program, and then sends the command to A2889B. After receiving the command, A2889B detects the actual flow through the internal sensor, compares it with the target value, and automatically adjusts the valve port opening until the set value is reached. This closed-loop control ensures the efficiency and accuracy of the sootblowing process.

Although the A2889B pneumatic angle valve is well designed, it also requires regular maintenance to maintain the best working condition. Maintenance mainly includes cleaning the inside of the valve body, checking whether the seal is intact, and testing the response speed and accuracy of the pneumatic actuator. These tasks are usually completed by a professional team of engineers who are familiar with the working principle of the equipment and can quickly identify and solve problems to ensure the stable operation of the sootblowing system.

Yoyik offers various types of valves and pumps and its spare parts for power plants:
Globe valve WJ40F-16P
solenoid valve plug J-220VAC-DN10-D/20B/2A
Solenoid valve 22FDA-K2T-W110R-20/LV
24 volt dc solenoid valve VQ5100-4
pilot operated solenoid valve DG4V 3 2C M U D6 60
double gearbox M02225.0BMCC1D1.5A
globe stop check valve K25FJ-1.6PA2
Electromagnetic directional valve 4WE6HA62/EW230N9K4
1 stage vacuum pump price 30WSRP
Mechanical seal ZU44-45
24v solenoid valve price J-110VDC-DN10-Y/20H/2AL
hydro mechanical servo valve S63JOGA4VPL
bevel gearbox manufacturers M02225.OBGCC1D1.5A
bellows sealed stop valve WJ15F-16P
high volume condensate pump KSB50-250
GREASE DISTRIBUTOR QJDF4-KM-3
best shut off valve KHWJ15F1.6P
main stop valve boiler KHWJ65F-1.6P
1 2 stainless steel needle valve SHV9.6
bellows sealed stop valve 65FWJ1.6P