The test solenoid valve 22FDA-F5T-W220R-20 is an important component in the feed pump turbine lubricating oil station. Its functions include switching the lubricating oil circuit, testing the safety valve, simulating faults, and assisting in data collection and analysis. For engineers, mastering these functions and skillfully using the test solenoid valve is the key to ensuring the safe and stable operation of the system. Let’s take a detailed look at the use of this test solenoid valve.

First of all, the preparation work before the test is the top priority. Workers must ensure that all related equipment is in a safe state, check the oil level, oil temperature and oil quality of the lubricating oil station, and confirm that the lubricating oil pump, filter and cooler are working properly. Then, it is our protagonist, the test solenoid valve 22FDA-F5T-W220R-20, and its connection status must be checked to ensure that the power supply is stable, the solenoid valve responds quickly, and there is no hysteresis.

In the test, the main function of 22FDA-F5T-W220R-20 is to flexibly switch the lubricating oil circuit. It can control the flow direction of lubricating oil according to the test requirements, ensuring that the lubricating oil can accurately flow to the parts that need lubrication under different test conditions. For example, in the case of simulated emergency shutdown, the solenoid valve can be quickly closed to cut off the supply of lubricating oil and test the emergency response capability of the system; in the case of simulated normal operation, the solenoid valve can ensure the continuous and stable supply of lubricating oil and verify the stability and reliability of the system.

The test solenoid valve 22FDA-F5T-W220R-20 is also responsible for testing the safety valve. The safety valve is the last line of defense of the lubricating oil station. When the system pressure exceeds the set value, the safety valve will automatically open to release the pressure and protect the system from damage. During the test, workers will control the pressure rise through the solenoid valve to test whether the safety valve is sensitive and whether the pressure release is accurate, to ensure that the safety valve can play its due role in an emergency.
In addition to normal operation tests, the test solenoid valve 22FDA-F5T-W220R-20 can also simulate various fault conditions, such as sudden stop of the lubricating oil pump, filter blockage, cooler failure, etc. Through the control of the solenoid valve, workers can observe the performance of the system under different faults, test the redundancy and fault recovery capabilities of the system, and discover and eliminate potential safety hazards in advance.

During the test, engineers will collect data through various sensors, such as pressure, temperature, flow, etc., and then use the different working states of the solenoid valve to compare and analyze and find out the possibility of system optimization. These data can not only help technical workers understand the actual operating status of the system, but also provide a basis for subsequent maintenance and upgrades to ensure that the lubricating oil station always maintains the best working condition.
Yoyik offers various types of valves and pumps and its spare parts for power plants:
sealing oil relief valve 3.5A25
Cooling fan YX3-132S1-2
screw type impeller HSNH660-40NZ
STG Lube oil tank Acumulator Repair kit NXQ-A-16L/20F-Y
PRESSURE REDUCING VALVE 5.7A25
diaphragm KS100ZXNO16 BQ12 SNOERH
solenoid valve dc 12v J-110VDC-DN6-U/15/31C
DC sealing oil pump bushing DLZB820R64B
solenoid valve 24 volt dc DEA-PCV-03/0560
Check Valve PN 01001693
bolted bonnet globe valve LJC50-1.6P
Bellows valves WJ10F2.5P
Drain valve 50FWJ1.6P
Bladder + Seal kit NXQA-16-20 F/Y
solenoid valve plug MP-C-089
solenoid valve controller FRD.WJA3.042
solenoid and coil CCP230M
Globe valve WJ25F2.5P
Actuator striker arm / drive coupling P22060D-01
solenoid valve 24 volt dc GS061600V