RTV Epoxy adhesive DFCJ0708 is a two-component epoxy adhesive composed of A and B components, with excellent insulation performance and adhesion, and a heat resistance level of F grade. This adhesive is mainly suitable for insulation treatment at the joints of motor stator bars, connecting wire joints, etc. It can also be used for coating the interlayer of mica tape during semi stacked insulation. This article will provide a detailed introduction to the usage and precautions of DFCJ0708.

Usage:

1. Mixing ratio: Mix components A and B in a weight ratio of 6:1 or 5:1. The specific mixing ratio can be adjusted according to actual needs. When mixing, first pour component A (milky white) into the container, then slowly pour component B (rose red viscous liquid) while stirring.

2. Mixing method: Use a clean mixing rod or scraper to stir in one direction until evenly mixed. Avoid repeated stirring or counterclockwise stirring to prevent the formation of bubbles.

3. Gluing: Apply the mixed RTV Epoxy adhesive DFCJ0708 evenly to the surface of the adhesive, and try to maintain a consistent thickness of the coating. When applying glue, tools such as scrapers, brushes, or rollers can be used to ensure even coating.

4. Bonding: Glue the parts that have been coated with adhesive and apply slight contact pressure to ensure that the RTV Epoxy adhesive DFCJ0708 fully contacts the surface of the object being glued. After bonding, squeeze out excess adhesive and wipe it clean.

Precautions for use:

1. Storage conditions: RTV Epoxy adhesive DFCJ0708 should be stored in a cool, dry, and ventilated place, away from direct sunlight, and away from sources of fire and oxidants.

2. Prevent contact with children: During use, the adhesive should be placed out of reach of children to avoid accidental ingestion or use.

3. Keep sealed: Unused adhesives should be kept sealed to avoid reacting with moisture and impurities in the air, which may affect the curing effect.

4. Cleaning and drying: Before using the adhesive, ensure that the surface of the adhesive is clean, dry, and free of impurities such as oil stains and dust. If necessary, cleaning agents can be used for cleaning.

5. Operating environment: Avoid using adhesives in harsh environments such as high temperature, high humidity, strong acid, and strong alkali to avoid affecting the bonding effect.

6. Mixing time: The mixed adhesive should be used up within the specified time to avoid prolonged exposure to air and prevent curing.

7. Safety protection: When using adhesive, protective gloves, masks, and other protective equipment should be worn to avoid contact between the adhesive and sensitive areas such as skin and eyes.

Through the above detailed explanation, we hope you can better understand the usage method and precautions of RTV Epoxy adhesive DFCJ0708. Proper use of adhesive can ensure bonding effectiveness and improve work efficiency. Meanwhile, following the precautions can ensure the safety and hygiene of the working environment.