In the complex and critical equipment system of power plants, the three-way valve is a common fluid control element, and its performance is directly related to the operating efficiency and stability of the entire system. LXF100/1.6C/P ​​three-way valve is one of the important equipment that is widely used, and the performance of its seals is one of the key factors.

I. The importance of seals

The valve seals play a vital role in LXF100/1.6C/P ​​three-way valves. It can effectively prevent fluid leakage, ensure the stable transmission of fluids and the sealing of the system. In the lubricating oil system of a power plant, any tiny leakage may cause the loss of lubricating oil, affect the lubrication effect of the equipment, and then cause equipment wear, failure or even shutdown, bringing serious safety hazards to the production and operation of the power plant. At the same time, good seals can also prevent external impurities, moisture, etc. from entering the system, maintain the purity of the fluid, and extend the service life of the system.

II. Main structures and materials of LXF100/1.6C/P ​​three-way valve seals

1. Gasket structure and materials

• Gasket between valve body and valve cover: LXF100/1.6C/P ​​three-way valve usually uses elastic materials to make gaskets in this part, which has good elasticity and corrosion resistance. For example, rubber gaskets have good flexibility and sealing performance, and can adapt to the small displacement between valve body and valve cover caused by temperature change, vibration and other factors, and maintain good sealing effect; polyurethane gaskets have higher wear resistance and tear resistance, and can maintain stable sealing performance in long-term operation; polytetrafluoroethylene gaskets have excellent chemical stability, can withstand various highly corrosive media, and ensure the reliability of sealing.

• Gasket between valve core and valve seat: Gaskets in this part are usually made of hard materials, such as steel, ceramics, hard alloy, etc. These hard materials have high wear resistance and high temperature resistance. For example, steel gaskets have high strength and hardness, can withstand greater pressure and friction, and prevent leakage between the valve core and the valve seat; ceramic gaskets have excellent wear resistance and high temperature resistance, and are suitable for high temperature and high pressure working environments; carbide gaskets have both high hardness and good corrosion resistance, and can maintain long-term sealing performance under harsh working conditions.

• Gaskets at the discharge port: Gaskets at the discharge port are usually made of metal materials, such as copper, steel, etc. These metal materials have high pressure resistance and wear resistance, can withstand certain pressure shocks and wear, and ensure the sealing and stability of the discharge port during normal discharge.

III. Key points for installation and replacement of seals

1. Key points for installation

• Before installing the seal, the installation site needs to be thoroughly cleaned to ensure that there are no impurities, scratches and damage on the surface to avoid affecting the installation quality and sealing effect of the seal.

• According to the installation markings and instructions of the seal, install the seal correctly to avoid the seal being installed in place or being damaged during installation.

• During the installation process, avoid excessive stretching, squeezing or twisting of the seal to avoid affecting its sealing performance and service life.

2. Replacement points

• When leaking, wearing or other damage is found in the seal, the seal needs to be replaced in time.

• When replacing the seal, choose a replacement with the same specifications and material as the original seal to ensure that the seal can fully match the sealing part.

• After replacing the seal, the sealing part needs to be inspected and debugged to ensure that the seal is installed correctly and the sealing effect is good.

IV. Maintenance and maintenance suggestions for seals

1. Regularly check the sealing performance of the seal and pay attention to whether there is leakage. If a slight leakage is found, the cause should be found out in time and appropriate measures should be taken to deal with it.

2. Clean the seal and its surrounding environment regularly to remove impurities and dirt that may affect the sealing effect.

3. For equipment that has been running for a long time, the seal can be replaced regularly according to the actual situation to prevent leakage accidents caused by aging and wear of the seal.

Understanding the structure, materials, installation and replacement points, and maintenance recommendations of the LXF100/1.6C/P ​​three-way valve seal is of great significance for power plant purchasers to choose appropriate seals, and for lubricating oil system specialists to better maintain and manage the system. I hope the above introduction can provide a useful reference for everyone in actual work.

When looking for high-quality, reliable hydraulic valves, YOYIK is undoubtedly a choice worth considering. The company specializes in providing a variety of power equipment including steam turbine accessories, and has won wide acclaim for its high-quality products and services. For more information or inquiries, please contact the customer service below:

E-mail: sales@yoyik.com
Tel: +86-838-2226655
Whatsapp: +86-13618105229