page_banner

Company News

  • Solid Structure of Jacking Oil Pump Filter 707FH3260GA10DN40H7F3.5C

    The jacking oil pump filter element 707FH3260GA10DN40H7F3.5C is installed at the oil outlet of the jacking oil pump. The fluid pressure at this location is relatively high, which requires high impact resistance of the filter element. A good skeleton can provide strengthened support and protection...
    Read more
  • What Will Happen If We Use Cut Corners Actuator Filter AP1E102-01D10V/-W

    The actuator of steam turbine is a servomotor which provides power to the turbine control valve and the devices connected to it through the pressure difference of high-pressure EH oil. The oil quality in the actuator must be kept clean. The filter element AP1E102-01D10V/-W is a commonly used filt...
    Read more
  • How to Set the Diatomite Filter AZ3E303-02D01V/-W for Regeneration Device?

    The diatomite acid removal filter AZ3E303-02D01V/-W is used in the regeneration device of steam turbine EH oil to remove acidic substances and impurities in the oil. The setting conditions of the filter include the following: Filtration accuracy: The filtration accuracy of the diatomite filter e...
    Read more
  • How to Check the Authenticity of Regeneration Device Filter AZ3E303-01D01V/-W?

    Yoyik is a manufacturer of regeneration device filter element AZ3E303-01D01V/-W. Due to frequent user inquiries on how to determine whether the filter element is an imitation, we have summarized several points and suggest that you refer to: Brand channels: When purchasing filter cartridges, cho...
    Read more
  • Factors to Consider for Upgrading the Filter Element EH30.00.003

    The EH oil filter EH30.00.003 is a special filter element used in power plants to filter pollutants from the EH oil system of steam turbines. For power plant users, balancing the cost of filter with their effectiveness is equally important. Some users will focus on reducing costs when making deci...
    Read more
  • Is It Necessary to Use High-Quality Filter Element WU-6300*1200?

    The hydraulic filter element WU-6300*1200, also known as the oil suction filter element or oil purifier filter element, is a coarse filter commonly used at the oil inlet of oil pumps. As a common type of hydraulic oil filter, it has a high retention rate in the market, and some users may have bee...
    Read more
  • How to Handle the Failures of Lube Filter LY-10/10W-40?

    The hydraulic oil filter LY-10/10W-40 is very convenient to use and is generally used to remove impurities from lubricating oil in hydraulic systems and hydraulic stations. Our daily maintenance is to extend its service life. When the lube filter element LY-10/10W-40 malfunctions, we need to take...
    Read more
  • Why Should We Replace the Lube Filter Element LY-38/25W Timely?

    The LY-38/25W lube filter element is the core component of the lubricating oil filter and is a vulnerable component that requires frequent replacement. Some users, in order to save costs, consider it unnecessary to replace the filter element in a timely manner as long as it appears to be still us...
    Read more
  • Requirements for the Effect of Generator Stator Cooling Water Filter SG125/0.7

    The cooling water for the generator stator adopts desalinated water or condensed water, and its water quality requirements are to ensure clean water quality, suitable pH value, low conductivity, and avoid the accumulation of sediment. The filter SG125/0.7 used for stator cooling water must achiev...
    Read more
  • Features of PP Meltblown Filter SG65/0.7 Comparing To Pleated Filters

    The meltblown filter SG65/0.7 is used for generator stator cooling water security filtration. It is made of non-toxic and odorless polypropylene as raw material, which is heated and melted, then sprayed, pulled, and received to form the filter material. The PP filter element SG65/0.7 has a deep f...
    Read more
  • Methods of Inspecting the Hydraulic Precision Filter MSF04S-01

    The main task of the fire resistant oil system of the steam turbine is to provide qualified lubrication and cooling oil for the support bearings, thrust bearings, turning gear, etc. of the steam turbine generator set. The importance of bearings is self-evident, and in order to protect them, it is...
    Read more
  • What Is the Steam Turbine Purifying Filter Element EH50A.02.03?

    The oil purifying filter element EH50A.02.03 is a precision filter element with a filtration accuracy less than 10 microns. It is a filter element with good feedback effect and high repurchase rate for power station use. It is made of high-quality filter materials to ensure good filtration effect...
    Read more