-
What Can Be Measured With Eddy Current Sensor PR6426/010-040
As a non-contact sensor, eddy current sensor PR6426/010-040 is often used in very harsh environments, such as oil pollution, hot steam, or severe temperature fluctuations. For some important applications, there are also requirements for accuracy, temperature stability, resolution, and cutoff freq...Read more -
How Does Magnetic Sensor SZCB-02 Measure Rotation Speed?
The SZCB-02 sensor is a commonly used sensor for measuring speed in power plants. Today Yoyik will take you to understand the working mode of the SZCB-02 speed sensor. The method of measuring speed using the SZCB-02 sensor is not actually complicated. There is a toothed disc at the front end of ...Read more -
Function of Reversal Rotating Speed Monitor JM-C-3ZF
For steam turbines, the measurement of the speed of the impactor is a necessary test before the new unit is put into operation or each major overhaul of the unit is connected to the grid, with the aim of preventing the impactor from getting stuck. However, the installation position of the emergen...Read more -
Introducing Six-Way Channel Switching Valve A-82.542.000
In industries such as petroleum, chemical, mining, and metallurgy, the six way directional valve A-82.542.000 is an important fluid directional device. This valve is installed in the pipeline for transporting lubricating oil in the thin oil lubrication system. By changing the relative position of...Read more -
Features of Direct Action Solenoid Valve ZS1DF02N1D16
The ZS1DF02N1D16 direct acting solenoid valve can work normally under vacuum, negative pressure, and zero pressure, without requiring the minimum pressure of the medium. It can start at zero pressure, so compared to the pilot type solenoid valve, the starting speed is faster, and is particularly ...Read more -
How Does The Main Lubricating Oil Pump 70LY-34X2-1B Work?
The lubricating oil main pump 70LY-34X2-1B is a cooling lubricating oil pump for the steam turbine main shaft, installed on the turbine rotor in the front bearing seat, directly driven by the turbine main shaft, and rigidly connected to the turbine main shaft. Due to the fact that this driving me...Read more -
Different Accumulators Used In Steam Turbine: NXQ-A-1.6/20-H-HT
In order to smoothly regulate the system pressure and store energy, both the high-pressure and low-pressure systems of the steam turbine are equipped with different accumulators. According to the pressure, flow, and regulation requirements of the steam turbine system, the distribution principle i...Read more -
Periodic Maintenance of Bladder Accumulator NXQ-A-16-20-F-Y
Regular maintenance of the steam turbine accumulator NXQ-A-16-20-F-Y can ensure its normal operation, safety, and reliability, reduce faults and downtime, and improve the production efficiency and economic benefits of the turbine unit. The main maintenance contents of Accumulator NXQ-A-16-20-F-Y...Read more -
Structure Design of Bladder Accumulator NXQ-A-/31.5-L-Y
The main function of the bladder type accumulator NXQ-A -/31.5-L-Y is to store capacity and replenish isolation fluid for the system. Its structure is mainly composed of a steel shell, an air valve, a capsule, and a liquid interface of a one-way valve. 1. Accumulator shell: It is a pressure vess...Read more -
Q&A: How to Remove Mushroom Valve of NXQ-AB-80/10-L Accumulator?
The installation and disassembly of NXQ series accumulators are relatively simple. But the actual situation varies from site to site, and various difficulties may be encountered during installation. For example, a user once asked Yoyik how to remove the one-way valve at the inlet of the accumulat...Read more -
Matters Needing Attention of Using Accumulator NXQ-A-25/31.5-L-EH-S
It is necessary to ensure that the accumulator NXQ-A-25/31.5-L-EH-S is used below the maximum operating pressure. When the usage pressure exceeds the maximum usage pressure value, it may cause damage to the product. Processing and modification are prohibited. Hot working (excluding connecting f...Read more -
Why Does Bellows Globe Valve KHWJ40F1.6 Have Good Sealing?
Bellows sealed globe valves are a type of valve with excellent sealing performance. The structural feature is a dual seal, which can perfectly isolate fluid and air, achieving zero leakage. The use of bellows sealed shut-off valves on pipelines is very common. Why does bellows globe valve KHWJ40...Read more
/
